PIKO GE 25-Ton Diesel - G: Difference between revisions
No edit summary |
|||
| Line 22: | Line 22: | ||
==Overview== | ==Overview== | ||
PIKO's new battery R/C sound-equipped GE 25-Ton locomotive uses original design documentation and authentic sound files recorded from the prototype. This model includes a custom TCS WOWSound® decoder with factory-preset configuration which includes sounds for horn, bell, prime mover, air compressor, brake release, and brake application. | |||
Loaded with prototypical features, the GE | Loaded with prototypical features, the GE 25-Ton locomotive from PIKO brings all the sights and sounds of GE's iconic rumble to your layout. | ||
==Specific Features== | ==Specific Features== | ||
| Line 35: | Line 35: | ||
*Powerful 5-pole precision can-type ball-bearing motor | *Powerful 5-pole precision can-type ball-bearing motor | ||
*Directional headlights | *Directional headlights | ||
*Cab light | |||
*Simple pushbutton volume control | |||
*Up to 80' R/C range (30 meters) | *Up to 80' R/C range (30 meters) | ||
*Pocket remote includes a CR2025 battery | *Pocket remote includes a CR2025 battery | ||
| Line 42: | Line 44: | ||
The {{PAGENAME}} is at its heart a WOWDiesel decoder but has had some customization to make it specific to the locomotive. The information below details where CV’s and operation differ from the standard Diesel decoder. | The {{PAGENAME}} is at its heart a WOWDiesel decoder but has had some customization to make it specific to the locomotive. The information below details where CV’s and operation differ from the standard Diesel decoder. | ||
''' | '''RC operation''' | ||
When operating in DC mode, the locomotive will sit still and silent until a sufficient track voltage is present. Once the minimum voltage (approximately 8 volts) is met, the locomotive will ignite the prime mover and the lights will come on. An additional increase in voltage will cause the locomotive to begin to move. A directional horn blast will sound, and the bell will activate automatically. Increasing the voltage further will shut off the automatic bell. Users may trigger a grade crossing horn quill sound by quickly adjusting the track voltage up and back down quickly. The directional horn blasts, quill, and automatic DC mode bell are enabled by default. If you would like to change these settings, as well as other behavior of your locomotive on DC power, please read more in our section on [[Diesel Version 5:DC Mode Operation|DC Mode Operation and Configuration for WOWSound Version 5]]. | When operating in DC mode, the locomotive will sit still and silent until a sufficient track voltage is present. Once the minimum voltage (approximately 8 volts) is met, the locomotive will ignite the prime mover and the lights will come on. An additional increase in voltage will cause the locomotive to begin to move. A directional horn blast will sound, and the bell will activate automatically. Increasing the voltage further will shut off the automatic bell. Users may trigger a grade crossing horn quill sound by quickly adjusting the track voltage up and back down quickly. The directional horn blasts, quill, and automatic DC mode bell are enabled by default. If you would like to change these settings, as well as other behavior of your locomotive on DC power, please read more in our section on [[Diesel Version 5:DC Mode Operation|DC Mode Operation and Configuration for WOWSound Version 5]]. | ||
Revision as of 13:10, 22 September 2026
Information on this wiki page provides particular details about this model not found in our basic guide.
| PIKO GE 25-Ton Diesel | |||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
Overview
PIKO's new battery R/C sound-equipped GE 25-Ton locomotive uses original design documentation and authentic sound files recorded from the prototype. This model includes a custom TCS WOWSound® decoder with factory-preset configuration which includes sounds for horn, bell, prime mover, air compressor, brake release, and brake application.
Loaded with prototypical features, the GE 25-Ton locomotive from PIKO brings all the sights and sounds of GE's iconic rumble to your layout.
Specific Features
Features include:
- Simple R/C Pocket Remote with pre-programmed buttons to control speed, direction, horn, and bell
- Completely powered by 6 'AAA' batteries (batteries not included)
- TCS high-quality 16-bit audio
- Authentic sounds recorded from a prototype locomotive
- Powerful 5-pole precision can-type ball-bearing motor
- Directional headlights
- Cab light
- Simple pushbutton volume control
- Up to 80' R/C range (30 meters)
- Pocket remote includes a CR2025 battery
- Motor is completely isolated from track power
Specific Features
The PIKO GE 25-Ton Diesel - G is at its heart a WOWDiesel decoder but has had some customization to make it specific to the locomotive. The information below details where CV’s and operation differ from the standard Diesel decoder.
RC operation
When operating in DC mode, the locomotive will sit still and silent until a sufficient track voltage is present. Once the minimum voltage (approximately 8 volts) is met, the locomotive will ignite the prime mover and the lights will come on. An additional increase in voltage will cause the locomotive to begin to move. A directional horn blast will sound, and the bell will activate automatically. Increasing the voltage further will shut off the automatic bell. Users may trigger a grade crossing horn quill sound by quickly adjusting the track voltage up and back down quickly. The directional horn blasts, quill, and automatic DC mode bell are enabled by default. If you would like to change these settings, as well as other behavior of your locomotive on DC power, please read more in our section on DC Mode Operation and Configuration for WOWSound Version 5.
Note: This WOWSound® product does not support TCS' Audio Assist® auditory feedback program.
Button Mappings
The values outlined below in the button mapping, sound list, and CV values are the defaults assigned to this particular decoder from the factory.
For information on how to program your locomotive using the values provided in the charts below, please see our List of Diesel Version 5 Standard CV's, and/or List of Diesel Version 5 Indexed CV's.
If you have a command station which supports all 28 function buttons and would like to disable function pagination, this may be done by re-configuring CV 177
| Button Mappings | ||||
|---|---|---|---|---|
| Function Button | Sound Action | Light Action | Dual Enabled | Page and Button |
| 0 | None | Headlights (F0F & F0R) | Yes | Page 1 Button 0 |
| 1 | Bell | None | No | Page 1 Button 1 |
| 2 | Horn - Long Blast | Blink Ditch Lights | Yes | Page 1 Button 2 |
| 3 | Horn - Short Blast | Ditch Lights On/Off (F1 & F2) | No | Page 1 Button 3 |
| 4 | Horn - Grade X Quill | Number Board Lights (F5 & F6) | No | Page 1 Button 4 |
| 5 | Train Brake | None | No | Page 1 Button 5 |
| 6 | Startup/Shutdown | Red Marker Lights (F3 & F4) | No | Page 1 Button 6 |
| 7 | None | Dim Headlights | Yes | Page 1 Button 7 |
| 8 | 1x Press Mute/Unmute 2x Press rotate light/sound mode or page |
None | Yes | Page 1 Button 8 |
| 9 | None | None | No | Page 1 Button 9 |
| 10 | Manual Notch Up | None | No | Page 2 Button 0 |
| 11 | Manual Notch Down | None | No | Page 2 Button 1 |
| 12 | Coupler Crash | None | No | Page 2 Button 2 |
| 13 | Coupler Release | None | No | Page 2 Button 3 |
| 14 | Brake Release | None | No | Page 2 Button 4 |
| 15 | Dynamic Brakes | None | No | Page 2 Button 5 |
| 16 | Momentum | None | No | Page 2 Button 6 |
| 17 | Crew Alert | None | No | Page 2 Button 7 |
| 18 | 1x Press Mute/Unmute | None | No | Page 2 Button 8 |
| 19 | None | None | No | Page 2 Button 9 |
| 20 | Air Spit | None | No | Page 3 Button 0 |
| 21 | Forward Quill | None | No | Page 3 Button 1 |
| 22 | Reverse Quill | None | No | Page 3 Button 2 |
| 23 | Stop Quill | None | No | Page 3 Button 3 |
| 24 | Rotate Bell/Horn | None | No | Page 3 Button 4 |
| 25 | Windshield Wipers | None | No | Page 3 Button 5 |
| 26 | Exhaust Fan | None | No | Page 3 Button 6 |
| 27 | None | None | No | Page 3 Button 7 |
| 28 | 1x Press Mute/Unmute | None | No | Page 3 Button 8 |
| Random Sound Mapping | |
|---|---|
| Random Sound Generator | Sound Played |
| 1 | Air Compressor |
| 2 | Air Spitter 1 |
| 3 | Air spitter 2 |
| 4 | None |
Sound list
| Sound Type | Sound Number | High Byte | Low Byte | Sounds Available |
|---|---|---|---|---|
| Air Compressor | 0 | 0 | 0 | GE Air Compressor Type 1 |
| 1 | 0 | 1 | GE Air Compressor Type 2 | |
| Air Spitter | 2 | 0 | 2 | Air Spitter #1 |
| 3 | 0 | 3 | Air Spitter #2 | |
| 4 | 0 | 4 | Air Spitter #3 | |
| Bell | 5 | 0 | 5 | Bell * |
| Brake Release | 11 | 0 | 11 | Brake Release |
| Brake Squeal | 12 | 0 | 12 | Brake Squeal * |
| Coupler Clank | 42 | 0 | 42 | Coupler Clank Closed |
| 43 | 0 | 43 | Coupler Clank Open | |
| Crew Alert | 44 | 0 | 44 | Crew Alert Feature |
| Dynamic Brake | 45 | 0 | 45 | Dynamic Brakes |
| 46 | 0 | 46 | Dynamic Brakes Medium | |
| 47 | 0 | 47 | Dynamic Brakes High | |
| Exhaust Fan | 48 | 0 | 48 | Exhaust Fan |
| Horn Forward Quill | 49 | 0 | 49 | Horn Forward Quill * |
| Horn Long | 54 | 0 | 54 | Horn Long * |
| Horn Quill | 59 | 0 | 59 | Horn Quill * |
| Horn Short | 64 | 0 | 64 | Horn Short * |
| Manual Notch Down | 69 | 0 | 69 | Notch Prime Mover Down |
| Manual Notch Up | 70 | 0 | 70 | Notch Prime Mover Up |
| Momentum | 71 | 0 | 71 | Momentum Feature |
| Mute | 73 | 0 | 73 | Mute All Sounds |
| Prime Mover Ignition | 150 | 0 | 150 | Prime Mover Ignition * |
| Horn Reverse Quill | 152 | 0 | 152 | Horn Reverse Quill * |
| Rotate Feature | 157 | 0 | 157 | Rotate Feature |
| Horn Stop Quill | 162 | 0 | 162 | Horn Stop Quill * |
| Windshield Wipers | 167 | 0 | 167 | Windshield Wiper |
*For Prime Mover, Bell, and Horn custom reprogramming use the sound numbers below in the corresponding CV from the table header
Prime Mover
| CV 123 Value | Active Prime Mover |
|---|---|
| 0 (default) | GE 7FDL16 |
Bell
| CV 122 Value | Active Bell |
|---|---|
| 0 | GE 80 Ton Bell |
| 1 | GE U23B Bell #1 |
| 2 | Baldwin AS616 Bell |
| 3 | GE U23B Bell #2 |
| 4 | EMD NW2 Bell |
| 5 (default) | GE U25B Bell |
Horn
| CV 120 Value | Active Horn |
|---|---|
| 0 | GE U23B Horn |
| 1 | GE U25B Horn |
| 2 | Leslie S3K |
| 3 (default) | Leslie S3L |
| 4 | Nathan P5 |
CV Addendum (Standard CV's)
The PIKO GE 25-Ton Diesel - G follows the motor and lighting CV's as described in in TCS' Complete Standard CV's List For WOWSound Version 5. Listed below are the CV's that have been modified for the PIKO GE 25-Ton Diesel - G decoder.
| CV | Value | Description |
|---|---|---|
| CV 3 | 5 | Acceleration Rate |
| CV 4 | 5 | Deceleration Rate |
| CV 13 | 63 | DC Mode Lights (1-8) |
| CV 14 | 3 | DC Mode Lights (0F/R & 9-12) |
| CV 35 | 3 | F1 Light Remapping |
| CV 36 | 3 | F2 Light Remapping |
| CV 37 | 6 | F3 Light Remapping |
| CV 38 | 6 | F4 Light Remapping |
| CV 39 | 4 | F5 Light Remapping |
| CV 40 | 4 | F6 Light Remapping |
| CV 41 | 255 | F7 Light Remapping |
| CV 42 | 255 | F8 Light Remapping |
| CV 43 | 255 | F9 Light Remapping |
| CV 44 | 255 | F10 Light Remapping |
| CV 49 | 40 | F0F Lighting Effect |
| CV 50 | 40 | F0R Lighting Effect |
| CV 51 | 10 | F1 Lighting Effect |
| CV 52 | 11 | F2 Lighting Effect |
| CV 53 | 0 | F3 Lighting Effect |
| CV 54 | 16 | F4 Lighting Effect |
| CV 61 | 33 | Configuration CV #2 |
| CV 109 | 1 | TCS Extended ID (High Byte) |
| CV 110 | 0 | TCS Extended ID (Mid Byte) |
| CV 111 | 2 | TCS Extended ID (Low Byte) |
| CV 115 | 0 | Motor Delay Reset Time |
| CV 120 | 3 | Horn Set Selecton |
| CV 122 | 5 | Bell Selection |
| CV 123 | 0 | Prime Mover Selection |
| CV 126 | 7 | Rule 17 Dimming Button Remapping |
| CV 139 | 1 | Random Sound Overall Timer |
| CV 141 | 5 | Random Sound 1 Frequency |
| CV 142 | 20 | Random Sound 2 Frequency |
| CV 143 | 255 | Random Sound 3 Frequency |
| CV 177 | 176 | User Options #2 |
| CV 179 | 7 | Automatic Sound Options #2 |
| CV 238 | 133 | Dual Enabled functions register 1 (F0-F7) |
| CV 241 | 8 | Dual Enabled functions register 4 (F24-F28) |
| CV 248 | 1 | Sound Set Version identifier |
| CV 249 | 190 | Decoder Hardware Model Identifier |
CV Addendum (Indexed CV's)
The PIKO GE 25-Ton Diesel - G follows the motor and lighting CV's as described in TCS' List of Indexed CV's for WOWSound Version 5. Listed below are the CV's that have been modified for the PIKO GE 25-Ton Diesel - G decoder.
| CV31 | CV32 | CV | Value | Description |
|---|---|---|---|---|
| 16 | 0 | 260 | 90 | DC Mode Bell Cutout Voltage - Regulated |
| 16 | 0 | 262 | 9 | DC Quill Voltage - Regulated |
| 16 | 0 | 264 | 85 | DC Mode Motor Start Voltage - Regulated |
| 16 | 0 | 266 | 13 | DC Mode Motor Hysteresis - Regulated |
| 16 | 0 | 268 | 140 | DC Mode Max ADC Value - Regulated |
| 16 | 0 | 274 | 90 | DC Mode Bell Cutout Voltage - Unregulated |
| 16 | 0 | 276 | 9 | DC Quill Voltage - Unregulated |
| 16 | 0 | 278 | 85 | DC Mode Motor Start Voltage - Unregulated |
| 16 | 0 | 280 | 15 | DC Mode Motor Hysteresis - Unregulated |
| 16 | 0 | 282 | 160 | DC Mode Max ADC Value - Regulated |
| 16 | 4 | 260 | 5 | Sound Mapping - F1 |
| 16 | 4 | 262 | 54 | Sound Mapping - F2 |
| 16 | 4 | 264 | 64 | Sound Mapping - F3 |
| 16 | 4 | 266 | 59 | Sound Mapping - F4 |
| 16 | 4 | 268 | 12 | Sound Mapping - F5 |
| 16 | 4 | 270 | 150 | Sound Mapping - F6 |
| 16 | 4 | 272 | 65535 | Sound Mapping - F7 |
| 16 | 4 | 274 | 73 | Sound Mapping - F8 |
| 16 | 4 | 276 | 65535 | Sound Mapping - F9 |
| 16 | 4 | 278 | 70 | Sound Mapping - F10 |
| 16 | 4 | 280 | 69 | Sound Mapping - F11 |
| 16 | 4 | 282 | 42 | Sound Mapping - F12 |
| 16 | 4 | 284 | 43 | Sound Mapping - F13 |
| 16 | 4 | 286 | 11 | Sound Mapping - F14 |
| 16 | 4 | 288 | 45 | Sound Mapping - F15 |
| 16 | 4 | 290 | 71 | Sound Mapping - F16 |
| 16 | 4 | 292 | 44 | Sound Mapping - F17 |
| 16 | 4 | 294 | 74 | Sound Mapping - F18 |
| 16 | 4 | 298 | 3 | Sound Mapping - F20 |
| 16 | 4 | 300 | 49 | Sound Mapping - F21 |
| 16 | 4 | 302 | 152 | Sound Mapping - F22 |
| 16 | 4 | 304 | 162 | Sound Mapping - F23 |
| 16 | 4 | 306 | 157 | Sound Mapping - F24 |
| 16 | 4 | 308 | 167 | Sound Mapping - F25 |
| 16 | 4 | 310 | 48 | Sound Mapping - F26 |
| 16 | 4 | 314 | 75 | Sound Mapping - F28 |
| 16 | 4 | 316 | 0 | Sound Mapping - R1 |
| 16 | 4 | 318 | 2 | Sound Mapping - R2 |
| 16 | 4 | 320 | 4 | Sound Mapping - R3 |
Demonstration
Coming Soon!
Decoder Service and Repair
For service/repair, contact the PIKO Service Department by visiting https://www.piko-america.com/pages/contact, calling +1 (619) 280-2800, or emailing support@piko-america.com. PIKO’s Service Department is available Tue, Wed, Thu: 9:00AM–2:30PM Pacific Time.
You can also send your locomotive to: PIKO America, LLC 4610 Alvarado Canyon Road, Suite 5 San Diego CA 92120 USA
Please include a detailed description of your concern and complete contact information. For some service issues regarding DCC sound decoders, the PIKO Service Department may forward your locomotive to TCS for resolution.