Diesel Version 5:CV 22

NMRA CV 22

Consist Lighting Control for F0 and F9-F12
Range of Values	0-255
Default Value	255

NMRA CV 22 - Consist Lighting for Function 0 and Function 9 through Function 12

This CV is used to configure what functions will respond to user input on the consist address. This particular CV affects F0 and F9-F12. For each Bit, a value of "1" indicates that the function will respond to instructions addressed to the consist address. A value of "0" indicates that the function will only respond to instructions addressed to the locomotive's base address. F0F is indicated by Bit 0, F0R by Bit 1, F9 by Bit 2, and F12 by Bit 7.

To determine which functions are active, use the table below and combine the values of the functions you would like to have active, and program the sum into CV21. By default, all functions are active on the consist address.

Feature	Value
Function 0 Forward	1
Function 0 Reverse	2
Function 9	4
Function 10	8
Function 11	16
Function 12	32

Related:

• Consist Address
• Consist Lighting (Part 1)
• Consist Acceleration Adjustment
• Consist Deceleration Adjustment
• Dual Prime Mover Delay