Diesel Version 5:Quick Presets

A quick way to set up certain features using CV 8
the table below shows the available quick presets in Version 5

WOWSound Version 5

Value	Macro/Operation
2	Factory Reset
3	Reset Sound Button Mappings
4	Reset all NMRA CV's (1-256)
5	Reset all Indexed CV's
6	Factory Reset only 128-point BEMF Table
8	Factory Reset
10	Load User Preset 1
11	Load User Preset 2
12	Load User Preset 3
15	Configure F1 and F2 outputs as Ditch Lights
11+	[Reserved]

Ditch Light Preset:

Programming CV 8 with the corresponding Macro number will set up blinking ditch lights. It puts the ditch lights on light output 1 and light output 2, turns the lights on and off with function 1, and causes them to blink along with blow the horn when function 2 is pressed.

The full list of available Macros and Quick Presets for Version 5 can be found here: CV 8 Macros

CV's that get configured as part of the preset:

1. CV 35 = 1 Light output 1 turned on/off with button 1.
2. CV 36 = 1 Light output 2 turned on/off with button 1.
3. CV 51 = 42 Light output 1 set to Ditch Light, active while going forward and reverse.
4. CV 52 = 43 Light output 2 set to Ditch Light, active while going forward and reverse.
5. CV 124 = 8 Maps Ditch Light Blink to button 2.
6. CV 238 += 8 to make function 2 Dual Enabled