CV 124

From Train Control Systems Documentation
Revision as of 21:39, 8 May 2023 by Dan Mycio (talk | contribs)
Jump to navigation Jump to search
NMRA CV 124
Ditch Light Blink Button
Range of Values0-28
Default Value2

NMRA CV 124 - Ditch Light Blink Button Remapping

This CV controls which function button makes the ditch lights blink when a light output is setup as a ditch light.

Bit Button to Map Value Default
0,1 Button 0 1 No
2 Button 1 4 No
3 Button 2 8 Yes
4 Button 3 16 No
5 Button 4 32 No
6 Button 5 64 No
7 Button 6 128 No

To control which button makes the ditch lights blink, simply enter the number of that button into this CV. For example to make the ditch lights blink when button 2 is pressed, program a value of 2.

This CV supports mapping to any and all NMRA functions from 0 to 6. If you would like to have multiple buttons be able to blink the ditch lights, program this CV with the SUM of all of the button numbers you would like to use. For example, if you want the bell (1), and horn (2) to each cause the ditch lights to blink, program a value of 12 (4+8). Note that in order for the ditch lights to STOP blinking, ALL of these functions need to be turned back off.


Related: