CV 159
Jump to navigation
Jump to search
| |||||||||
NMRA CV 159 - Ditch Light Blink Button Mapping (7-12)
NOTE: THIS CV IS CURRENTLY ONLY SUPPORTED ON SOME OEM BACHMANN DECODERS
This CV allows the user to remap the button used to blink the ditch light lighting effect. This CV can map this function to buttons between 7 and 12. Multiple bits can be set within this CV to map the feature to multiple buttons simultaneously, though this is not recommended.
| CV 159 - Ditch Light Blink Mapping For Function Group 2 (7-12) | |||
|---|---|---|---|
| Bit | Button to Map | Default | Value |
| 0,1 | Not Used | N/A | N/A |
| 2 | 7 | NO | 4 |
| 3 | 8 | NO | 8 |
| 4 | 9 | NO | 16 |
| 5 | 10 | NO | 32 |
| 6 | 11 | NO | 64 |
| 7 | 12 | NO | 128 |
If you would like to use multiple buttons to be able to blink the ditch lights, set each bit for each button you would like to use. Set this CV to 0 if you do not want any button to blink the ditch lights.
See Dual Enabled Functions to if you want to make this function active in Sound Mode and not just in Light Mode.
Related:
