Bachmann Sound Value FT - HO
Information on this wiki page is particular details about this model not found in our basic guide.
| Bachmann Sound Value FT - HO | |||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
Contents
Overview
The values outlined below in the button mapping, sound list, and CV values are the defaults assigned to this particular decoder from the factory. This decoder does not support Audio Assist TM.
Specific Features
specific features content
Button Mappings
The FT locomotive supports "function pagination." This makes it easy to access all 28 functions and all lighting effects on throttles with limited function access by adding an offset to the pressed function button (offset of 10 for function page 2, offset of 20 for function page 3. For example:
- Press function 8 twice to rotate through the pages until the decoder announces "function page two."
- Press function 5
- The decoder will activate function 5 + 10 (page 2 offset) = 15
Note: the decoder supports accessing function 15 by pressing F15 on your throttle regardless of the currently selected function page.
| Button Mappings | ||||
|---|---|---|---|---|
| Function Button | Sound Action | Light Action | Dual Enabled | Page and Button |
| 0 | None | Constant Bright - Reverse Only - Lamp F0F | False | Page 1 Button 0 |
| 1 | Bell | None | False | Page 1 Button 1 |
| 2 | Horn Long | None | False | Page 1 Button 2 |
| 3 | Horn Short | None | False | Page 1 Button 3 |
| 4 | Horn Quill | None | False | Page 1 Button 4 |
| 5 | Brake Squeal | None | False | Page 1 Button 5 |
| 6 | Prime Mover Ignition | None | False | Page 1 Button 6 |
| 7 | None | None Special Function: Dim the Rule 17 Light |
False | Page 1 Button 7 |
| 8 | 1x Press Mute/Unmute 2x Press to rotate page |
None | True | Page 1 Button 8 |
| 9 | Crew Alert | None | False | Page 1 Button 9 |
| 10 | Manual Notch Up | None | False | Page 2 Button 0 |
| 11 | Manual Notch Down | None | False | Page 2 Button 1 |
| 12 | Coupler Clank | None | False | Page 2 Button 2 |
| 13 | Coupler Clank | None | False | Page 2 Button 3 |
| 14 | Brake Release | None | False | Page 2 Button 4 |
| 15 | Air Spitter | None | True | Page 2 Button 5 |
| 16 | Momentum | None | True | Page 2 Button 6 |
| 17 | Dynamic Brake | None | False | Page 2 Button 7 |
| 18 | 1x Press Mute/Unmute 2x Press to rotate page |
None | True | Page 2 Button 8 |
| 19 | None | None | False | Page 2 Button 9 |
| 20 | None | None | False | Page 3 Button 0 |
| 21 | Forward Sound | None | False | Page 3 Button 1 |
| 22 | Reverse Sound | None | False | Page 3 Button 2 |
| 23 | Stop Sound | None | False | Page 3 Button 3 |
| 24 | Rotate Whistle | None | False | Page 3 Button 4 |
| 25 | Windshield Wipers | None | False | Page 3 Button 5 |
| 26 | Exhaust Fan | None | False | Page 3 Button 6 |
| 27 | None | None | False | Page 3 Button 7 |
| 28 | 1x Press Mute/Unmute 2x Press to rotate page |
None | True | Page 3 Button 8 |
| Random Sound Mapping | |
|---|---|
| Random Sound Generator |
Sound Played |
| 1 | Air Compressor |
| 2 | Air Spitter |
| 3 | Disabled |
| 4 | Disabled |
Sound list
| Sound Type | Sound Number | High Byte | Low Byte | Sounds Available |
|---|---|---|---|---|
| air compressor | 0 | 0 | 0 | EMD Air Compressor |
| air spitter | 1 | 0 | 1 | Air Spitter 1 |
| 2 | 0 | 2 | Air Spitter 2 | |
| bell | 3 | 0 | 3 | bell * |
| brake release | 8 | 0 | 8 | brake release |
| brake squeal | 9 | 0 | 9 | brake squeal * |
| coupler clank | 39 | 0 | 39 | coupler clank closed |
| 40 | 0 | 40 | coupler clank open | |
| dynamic brake | 42 | 0 | 42 | Dynamic brakes |
| exhaust fan | 43 | 0 | 43 | Exhaust Fan |
| forward sound | 44 | 0 | 44 | forward sound * |
| horn long | 52 | 0 | 52 | horn long * |
| horn quill | 60 | 0 | 60 | horn quill * |
| horn short | 68 | 0 | 68 | horn short * |
| prime mover ignition | 157 | 0 | 157 | prime mover ignition * |
| reverse sound | 159 | 0 | 159 | reverse sound * |
| stop sound | 175 | 0 | 175 | stop sound * |
| windshield wipers | 183 | 0 | 183 | Windshield Wiper |
*For Prime Mover, Bell, and Horn custom reprogramming use the sound numbers below in the corresponding CV from the table header
Prime Mover:
| CV 149 Value | Active Prime Mover |
|---|---|
| 0 (default) | EMD 567BC 16 |
Bell:
| CV 158 Value | Active Bell |
|---|---|
| 0 (default) | Conrail Num 2233 GP30 air powered bell |
| 1 | VO 1000 Bell |
| 2 | Western Pacific 713 bell |
| 3 | Western Pacific 918D F unit bell |
Horn:
| CV 146 Value | Active Horn |
|---|---|
| 0 (default) | Southern Pacific 3100 Horn |
| 1 | Hancock Air Whistle |
| 2 | Leslie 125 |
| 3 | Leslie 200 |
| 4 | Leslie RS3 |
| 5 | Nathan K3LL |
| 6 | Wabco E2 3 Chime Horn |
CV Addendum (Standard CV's)
The FT follows the motor and lighting CV's as described in TCS's Complete Standard CV's List. Listed below are the CV's that have been modified for the FT decoder.
| CV | Value | Description |
|---|---|---|
| CV 3 | 5 | Acceleration Rate |
| CV 4 | 5 | Deceleration Rate |
| CV 7 | 4 | Manufacturer Version Number |
| CV 49 | 8 | F0F light feature |
| CV 115 | 0 | Motor Delay Reset Time |
| CV 120 | 68 | DC Mode Bell Cutout Voltage |
| CV 123 | 7 | Rule 17 Dimming Button |
| CV 137 | 116 | DC Mode Max ADC Value |
| CV 146 | 0 | Horn Set Selector |
| CV 148 | 75 | Volume - Master |
| CV 149 | 0 | Prime Mover Type |
| CV 238 | 129 | Dual Enabled functions register 1 (F0-F7) |
| CV 247 | 77 | none supplied |
| CV 249 | 181 | none supplied |
| CV 250 | 10 | Date Code - Month |
| CV 251 | 7 | Date Code - Day |
| CV 252 | 20 | Date Code - Year |
CV Addendum (Indexed CV's)
The FT follows the motor and lighting CV's as described in TCS's WOWDiesel Programming Guide. Listed below are the CV's that have been modified for the FT decoder.
| CV31 | CV32 | CV | Value | Description |
|---|---|---|---|---|
| 16 | 4 | 260 | 3 | Sound Mapping - F1 |
| 16 | 4 | 262 | 52 | Sound Mapping - F2 |
| 16 | 4 | 264 | 68 | Sound Mapping - F3 |
| 16 | 4 | 266 | 60 | Sound Mapping - F4 |
| 16 | 4 | 268 | 9 | Sound Mapping - F5 |
| 16 | 4 | 270 | 157 | Sound Mapping - F6 |
| 16 | 4 | 272 | 65535 | Sound Mapping - F7 |
| 16 | 4 | 274 | 80 | Sound Mapping - F8 |
| 16 | 4 | 276 | 41 | Sound Mapping - F9 |
| 16 | 4 | 278 | 77 | Sound Mapping - F10 |
| 16 | 4 | 280 | 76 | Sound Mapping - F11 |
| 16 | 4 | 282 | 39 | Sound Mapping - F12 |
| 16 | 4 | 284 | 40 | Sound Mapping - F13 |
| 16 | 4 | 286 | 8 | Sound Mapping - F14 |
| 16 | 4 | 288 | 2 | Sound Mapping - F15 |
| 16 | 4 | 290 | 78 | Sound Mapping - F16 |
| 16 | 4 | 292 | 42 | Sound Mapping - F17 |
| 16 | 4 | 294 | 81 | Sound Mapping - F18 |
| 16 | 4 | 300 | 44 | Sound Mapping - F21 |
| 16 | 4 | 302 | 159 | Sound Mapping - F22 |
| 16 | 4 | 304 | 175 | Sound Mapping - F23 |
| 16 | 4 | 306 | 167 | Sound Mapping - F24 |
| 16 | 4 | 308 | 183 | Sound Mapping - F25 |
| 16 | 4 | 310 | 43 | Sound Mapping - F26 |
| 16 | 4 | 314 | 82 | Sound Mapping - F28 |
| 16 | 4 | 316 | 0 | Sound Mapping - R1 |
| 16 | 4 | 318 | 1 | Sound Mapping - R2 |
| 16 | 4 | 324 | 65535 | Sound Mapping - TRIGGERED |
Demonstration
Video Here
Decoder Service and Repair
For service/repair, contact the Bachmann Service Department by visiting www.bachmanntrains.com/home-usa/service.php, calling 1-800-356-3910 (toll-free within the U.S. and Canada), or emailing service@bachmanntrains.com. Bachmann’s Service Department is available Monday thru Friday, 8:30 AM to 4:30 PM ET.
You can also send your locomotive to: Bachmann Trains Service Department 1400 East Erie Avenue Philadelphia, PA 19124
Please include a detailed description of your concern and complete contact information. For some service issues regarding DCC sound decoders, the Bachmann Service Department may forward your locomotive to TCS for resolution.
