Diesel Version 5:Function Remapping

Light Function Remapping

Any of the light functions can be mapped to any of 28 available function buttons.
This is most easily done using Audio Assist™ (see the "light options menu")

Light function remapping can also be done using CV programming. To control which button turns on a function light simply enter the number of the function button (0-28) into the CV for that light. For example, if you want light function one (green wire) to turn on when function button 2 is pressed, put a value of 2 into CV35

CV	Light output	Wire Color	Default Value	Default Button
CV33	F0F	White	0	F0
CV34	F0R	Yellow	0	F0
CV35	F1	Green	1	F1
CV36	F2	Purple	2	F1
CV37	F3	Brown	3	F3
CV38	F4	Pink	4	F4
CV39	F5	Pink/Purple	5	F5
CV40	F6	Green/Brown	6	F6
CV40	F6	Green/Brown	6	F6
CV40	F6	Green/Brown	6	F6
CV40	F6	Green/Brown	6	F6
CV40	F6	Green/Brown	6	F6
CV40	F6	Green/Brown	6	F6

This method of light function remapping is a "many to 1" method in that many light functions can be turned on by one button, and light function can only be controlled by one button.

• Note: This method uses the same CV's as previous WOWSound decoders but uses different CV values. This was done to make the process easier to understand.

Related:

• Changing Light Effects
• Dual Enabled Functions
• Quick Presets
• Remapping Sounds