Difference between revisions of "Diesel Version 5:Function Remapping"
Jump to navigation
Jump to search
en>Johnd (Created page with "== Light Function Remapping == Any of the light functions can be mapped to any of 28 available function buttons.<br> This is most easily done using {{NAMESPACE}}:Audio_Assis...") |
m (1 revision imported) |
(No difference)
| |
Latest revision as of 21:46, 10 December 2020
Light Function Remapping
Any of the light functions can be mapped to any of 28 available function buttons.
This is most easily done using Audio Assist™ (see the "light options menu")
Light function remapping can also be done using CV programming.
To control which button turns on a function light simply enter the number of the function button (0-28) into the CV for that light.
For example, if you want light function one (green wire) to turn on when function button 2 is pressed, put a value of 2 into CV35
| CV | Light output | Wire Color | Default Value | Default Button |
|---|---|---|---|---|
| CV33 | F0F | White | 0 | F0 |
| CV34 | F0R | Yellow | 0 | F0 |
| CV35 | F1 | Green | 1 | F1 |
| CV36 | F2 | Purple | 2 | F1 |
| CV37 | F3 | Brown | 3 | F3 |
| CV38 | F4 | Pink | 4 | F4 |
| CV39 | F5 | Pink/Purple | 5 | F5 |
| CV40 | F6 | Green/Brown | 6 | F6 |
This method of light function remapping is a "many to 1" method in that many light functions can be turned on by one button, and light function can only be controlled by one button.
- Note: This method uses the same CV's as previous WOWSound decoders but uses different CV values. This was done to make the process easier to understand.
