Difference between revisions of "Diesel Version 5:CV 8"

From Train Control Systems Documentation
Jump to navigation Jump to search
m
Line 1: Line 1:
{{Infobox
+
{{Infobox CV
|title = NMRA CV 8
+
|cv name=Manufacturer ID
|header1 = Manufacturer ID
+
|cv range=0-255
|label2 = Value
+
|cv accepted=None (read Only)
|data2 = 153 (Read Only)
+
|cv default=153
 
}}
 
}}
  
 
==NMRA CV 8 - Manufacturer ID==
 
==NMRA CV 8 - Manufacturer ID==
CV8 contains the [https://www.nmra.org/manufacturer-id-numbers NMRA assigned ID number] of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed under the Standards section of the [https://www.nmra.org/ NMRA Website]. The use of a value not assigned by the NMRA will immediately cause the decoder to not be in conformance of the NMRA Standards.  
+
CV8 contains the [https://www.nmra.org/manufacturer-id-numbers NMRA-assigned ID number] of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed under the Standards section of the [https://www.nmra.org/ NMRA Website]. The use of a value not assigned by the NMRA will immediately cause the decoder to not be in conformance of the NMRA Standards.  
 +
 
 +
Train Control Systems' Manufacturer ID Number is 153. 
  
 
CV 8 is classified as a Read Only CV. The CV contains a value which cannot be overwritten; however, it is possible to "write" a value to this CV. Doing so may perform a "Macro" such as a Factory Reset, or other operation(s). See below some examples from TCS:
 
CV 8 is classified as a Read Only CV. The CV contains a value which cannot be overwritten; however, it is possible to "write" a value to this CV. Doing so may perform a "Macro" such as a Factory Reset, or other operation(s). See below some examples from TCS:

Revision as of 22:13, 2 April 2021

CV 8
Manufacturer ID
Range of Values0-255
Accepted ValuesNone (read Only)
Default Value153

NMRA CV 8 - Manufacturer ID

CV8 contains the NMRA-assigned ID number of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed under the Standards section of the NMRA Website. The use of a value not assigned by the NMRA will immediately cause the decoder to not be in conformance of the NMRA Standards.

Train Control Systems' Manufacturer ID Number is 153.

CV 8 is classified as a Read Only CV. The CV contains a value which cannot be overwritten; however, it is possible to "write" a value to this CV. Doing so may perform a "Macro" such as a Factory Reset, or other operation(s). See below some examples from TCS:

CV 8 "Macros"

CV 8 offers multiple "macro" options which allow you to quickly configure certain aspects of the decoder on the fly. Most macros will perform a sequence of operations internally within the decoder, meaning you would not need to perform each of those operations individually, and can instead use one single command. CV 8 can also be used to save and load User Presets, perform a factory reset, and more!

CV 8 Macros may be programmed on the mainline or a programming track; however, it is strongly recommended that you use a dedicated programming track when performing a factory reset so as to avoid any addressing conflicts.

Available Macros

TCS Non-Sound Version 88-91
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-9 Not Used
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
TCS Non-Sound Version 92
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-7 Not Used
8 Factory Reset (Excluding ULST)
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
WOWSound Version 4
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-9 Not Used
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
13 Set Throttle Mode to "Traditional"
14 Set Throttle Mode to "Prototype"