Difference between revisions of "Diesel Version 5:CV 8"

From Train Control Systems Documentation
Jump to navigation Jump to search
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Infobox CV
+
{{:CV_8}}
|cv name=Manufacturer ID
+
{| class="wikitable"
|cv range=0-255
+
|+WOWSound Version 5
|cv accepted=None (read Only)
+
!Value
|cv default=153
+
!Macro/Operation
}}
+
|-
 
+
|2
==NMRA CV 8 - Manufacturer ID==
+
|Factory Reset
CV8 contains the [https://www.nmra.org/manufacturer-id-numbers NMRA-assigned ID number] of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed under the Standards section of the [https://www.nmra.org/ NMRA Website]. The use of a value not assigned by the NMRA will immediately cause the decoder to not be in conformance of the NMRA Standards.
+
|-
 
+
|3
Train Control Systems' Manufacturer ID Number is 153. 
+
|Reset Sound Button Mappings
 
+
|-
CV 8 is classified as a Read Only CV. The CV contains a value which cannot be overwritten; however, it is possible to "write" a value to this CV. Doing so may perform a "Macro" such as a Factory Reset, or other operation(s). See below some examples from TCS:
+
|4
 
+
|Reset all [[Diesel Version 5:WOWDiesel Standard CV's|NMRA CV's]] (1-256)
{{:CV 8 Macros}}
+
|-
 
+
|5
[[Category:Standard CV]]
+
|Reset all [[Diesel Version 5:WOWDiesel Indexed CV's|Indexed CV's]]
[[Category:Read-Only CV]]
+
|-
 +
|6
 +
|Factory Reset only 128-point BEMF Table
 +
|-
 +
|8
 +
|Factory Reset
 +
|-
 +
|10
 +
|Load User Preset 1
 +
|-
 +
|11
 +
|Load User Preset 2
 +
|-
 +
|12
 +
|Load User Preset 3
 +
|-
 +
|15
 +
|Configure F1 and F2 outputs as [https://tcsdcc.com/techsupport#ditch_lights Ditch Lights]
 +
|-
 +
|11+
 +
|[Reserved]
 +
|}

Latest revision as of 22:23, 23 July 2021

CV 8
Manufacturer ID
Range of Values0-255
Accepted ValuesNone
Default Value153

NMRA CV 8 - Manufacturer ID

CV8 contains the NMRA-assigned ID number of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed under the Standards section of the NMRA Website. The use of a value not assigned by the NMRA will immediately cause the decoder to not be in conformance of the NMRA Standards.

Train Control Systems' Manufacturer ID Number is 153.

CV 8 is classified as a Read Only CV. The CV contains a value which cannot be overwritten; however, it is possible to "write" a value to this CV. Doing so may perform a "Macro" such as a Factory Reset, or other operation(s). See below some examples from TCS:

CV 8 "Macros"

CV 8 offers multiple "macro" options which allow you to quickly configure certain aspects of the decoder on the fly. Most macros will perform a sequence of operations internally within the decoder, meaning you would not need to perform each of those operations individually, and can instead use one single command. CV 8 can also be used to save and load User Presets, perform a factory reset, and more!

CV 8 Macros may be programmed on the mainline or a programming track; however, it is strongly recommended that you use a dedicated programming track when performing a factory reset so as to avoid any addressing conflicts.

Available Macros

TCS Non-Sound Version 88-91
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-9 Not Used
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
TCS Non-Sound Version 92
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-7 Not Used
8 Factory Reset (Excluding ULST)
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
WOWSound Version 4
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-9 Not Used
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
13 Set Throttle Mode to "Traditional"
14 Set Throttle Mode to "Prototype"
WOWSound Version 5
Value Macro/Operation
2 Factory Reset
3 Reset Sound Button Mappings
4 Reset all NMRA CV's (1-256)
5 Reset all Indexed CV's
6 Factory Reset only 128-point BEMF Table
8 Factory Reset
10 Load User Preset 1
11 Load User Preset 2
12 Load User Preset 3
15 Configure F1 and F2 outputs as Ditch Lights
11+ [Reserved]