Diesel Version 5:CV 176

From Train Control Systems Documentation
Revision as of 18:59, 27 September 2018 by en>Dan Mycio (→‎NMRA CV 176 - Sound Options #1)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
NMRA CV 176
Sound Options 1
Range of Values0-255
Default Value251

NMRA CV 176 - Sound Options #1

CV176 controls various settings in the WOWDecoder. To program this CV, first decide which features you want to have active. Take the values in the Value column corresponding to the feature(s) you want active and add them together. Program the total value into CV176. See the table below for available options

Related

There are additional user options which may be configured via CV 177 - Sound Options #2

Feature Description Default Value
Manual Notching Feedback (Relay Sound) Enable this setting to have the decoder play relay sound when manually changing notches. ON 1
Mute On Startup When this setting is enabled, the decoder will mute on power up until it is issued a command. OFF 4
Momentum Mode Audio Feedback This feature announces the active Momentum Mode when it is changed. ON 8
Rotate Feature Audio Feedback Enable this setting to allow the decoder to announce the new horn or play a bell snippet when rotating through sounds when using the Rotate Feature ON 16
Light/Sound Mode Audio Feedback Enable this setting to have the decoder announce what the active control mode is for your throttle after pushing the mute button twice. ON 32
Audio Auto Shutoff The Audio Auto Shutoff feature mutes the decoder after a set time of inactivity. You may adjust the time with the Audio Shutoff Timer. The Automatic Audio Shutoff will not mute the sound if the decoder is in motion. ON 64
Digitrax Throttle Setting If you use a Digitrax throttle which has function 2 set as a "momentary function" (E.G. DT400+) this setting makes Audio Assist work better. ON 128