CV 159

From Train Control Systems Documentation
Revision as of 20:25, 8 May 2023 by JosephR (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
CV 159
Ditch Light Blink Button Mapping (7-12)
Range of Values4-128
Accepted Values4-128
Default Value0

NMRA CV 159 - Ditch Light Blink Button Mapping (7-12)

NOTE: THIS CV IS CURRENTLY ONLY SUPPORTED ON SOME OEM BACHMANN DECODERS

This CV allows the user to remap the button used to blink the ditch light lighting effect. This CV can map this function to buttons between 7 and 12. Multiple bits can be set within this CV to map the feature to multiple buttons simultaneously, though this is not recommended.

CV 159 - Ditch Light Blink Mapping For Function Group 2 (7-12)
Bit Button to Map Default Value
0,1 Not Used N/A N/A
2 7 NO 4
3 8 NO 8
4 9 NO 16
5 10 NO 32
6 11 NO 64
7 12 NO 128

If you would like to use multiple buttons to be able to blink the ditch lights, set each bit for each button you would like to use. Set this CV to 0 if you do not want any button to blink the ditch lights.

See Dual Enabled Functions to if you want to make this function active in Sound Mode and not just in Light Mode.

Related: