Difference between revisions of "Auto Notching Calibration"
(Created page with "=== Version 4 Calibration Method === To calibrate your WOWDiesel locomotive so that it knows the ruling grade and downhill grades on your layout enter Audio Assist® and g...") |
(No difference)
|
Revision as of 03:23, 27 August 2022
Version 4 Calibration Method
To calibrate your WOWDiesel locomotive so that it knows the ruling grade and downhill grades on your layout enter Audio Assist® and go to the calibration menu (menu 3.2) and follow the audio prompt from the decoder. It will ask you to run the locomotive in a coasting condition and then a notch 8 condition. (PRO TIP: While on the calibration menu you can calibrate the coasting point by pressing function 1 or the notch 8 point by pressing button 2, even if the menu is telling you to do otherwise)
Behind the scenes Audio Assist® is saving the calibration data to indexed CV4:17 BEMF Calibration Low and CV4:18 BEMF Calibration High both CV's can be programmed tweaked manually. TCS recommends calibrating using Audio Assist® and then manually tweaking the CV's if need be.
