NMRA CV 8| Manufacturer ID |
|---|
| Value | 153 (Cannot be adjusted) |
|---|
NMRA CV 8 - Manufacturer ID
CV8 shall contain the NMRA assigned id number of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed in Appendix A of this Standard. The use of a value not assigned by the NMRA shall immediately cause the decoder to not be in conformance to this Standard. The CV shall be implemented as a read-only value, which cannot be modified. (READ ONLY)
CV 8 "Macros"
CV 8 offers multiple "macro" options which allow you to quickly configure certain aspects of the decoder on the fly. Most macros will perform a sequence of operations internally within the decoder, meaning you would not need to perform each of those operations individually, and can instead use one single command. CV 8 can also be used to save and load User Presets, perform a factory reset, and more!
CV 8 Macros may be programmed on the mainline or a programming track; however, it is strongly recommended that you use a dedicated programming track when performing a factory reset so as to avoid any addressing conflicts.
Available Macros
TCS Non-Sound Version 88-91
| Value
|
Macro/Operation
|
| 2
|
Factory Reset (Excluding ULST)
|
| 3-9
|
Not Used
|
| 10
|
Configure F1 and F2 Ditch Lights
|
| 11
|
Configure Trolley Preset
|
| 12
|
Configure "Deluxe" Trolley Preset
|
TCS Non-Sound Version 92
| Value
|
Macro/Operation
|
| 2
|
Factory Reset (Excluding ULST)
|
| 3-7
|
Not Used
|
| 8
|
Factory Reset (Excluding ULST)
|
| 10
|
Configure F1 and F2 Ditch Lights
|
| 11
|
Configure Trolley Preset
|
| 12
|
Configure "Deluxe" Trolley Preset
|
WOWSound Version 4
| Value
|
Macro/Operation
|
| 2
|
Factory Reset (Excluding ULST)
|
| 3-9
|
Not Used
|
| 10
|
Configure F1 and F2 Ditch Lights
|
| 11
|
Configure Trolley Preset
|
| 12
|
Configure "Deluxe" Trolley Preset
|
| 13
|
Set Throttle Mode to "Traditional"
|
| 14
|
Set Throttle Mode to "Prototype"
|
