Diesel Version 5:CV 120

NMRA CV 120

DC Bell Cutout Voltage
Range of Values	0-255
Default Value	69

NMRA CV 120 - DC Bell Cutout Voltage

This CV depicts when the automatic bell will turn off (if enabled) when operating in DC mode.
The higher the value in this CV the greater the DC throttle must be before the automatic bell turns off. The DC mode automatic bell will come on when the locomotive starts moving, turn off when the setpoint voltage is reached, and turn back on when the voltage goes below that voltage again (not sure if it comes back on, need to confirm that)

Related

• DC Mode Operation