Difference between revisions of "Diesel Version 5:CV 8"
m |
|||
| Line 1: | Line 1: | ||
| − | {{Infobox | + | {{Infobox CV |
| − | + | |cv name=Manufacturer ID | |
| − | | | + | |cv range=0-255 |
| − | | | + | |cv accepted=None (read Only) |
| − | | | + | |cv default=153 |
}} | }} | ||
==NMRA CV 8 - Manufacturer ID== | ==NMRA CV 8 - Manufacturer ID== | ||
| − | CV8 contains the [https://www.nmra.org/manufacturer-id-numbers NMRA assigned ID number] of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed under the Standards section of the [https://www.nmra.org/ NMRA Website]. The use of a value not assigned by the NMRA will immediately cause the decoder to not be in conformance of the NMRA Standards. | + | CV8 contains the [https://www.nmra.org/manufacturer-id-numbers NMRA-assigned ID number] of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed under the Standards section of the [https://www.nmra.org/ NMRA Website]. The use of a value not assigned by the NMRA will immediately cause the decoder to not be in conformance of the NMRA Standards. |
| + | |||
| + | Train Control Systems' Manufacturer ID Number is 153. | ||
CV 8 is classified as a Read Only CV. The CV contains a value which cannot be overwritten; however, it is possible to "write" a value to this CV. Doing so may perform a "Macro" such as a Factory Reset, or other operation(s). See below some examples from TCS: | CV 8 is classified as a Read Only CV. The CV contains a value which cannot be overwritten; however, it is possible to "write" a value to this CV. Doing so may perform a "Macro" such as a Factory Reset, or other operation(s). See below some examples from TCS: | ||
Revision as of 22:13, 2 April 2021
| |||||||||
NMRA CV 8 - Manufacturer ID
CV8 contains the NMRA-assigned ID number of the manufacturer of this decoder. The currently assigned manufacturer ID codes are listed under the Standards section of the NMRA Website. The use of a value not assigned by the NMRA will immediately cause the decoder to not be in conformance of the NMRA Standards.
Train Control Systems' Manufacturer ID Number is 153.
CV 8 is classified as a Read Only CV. The CV contains a value which cannot be overwritten; however, it is possible to "write" a value to this CV. Doing so may perform a "Macro" such as a Factory Reset, or other operation(s). See below some examples from TCS:
CV 8 "Macros"
CV 8 offers multiple "macro" options which allow you to quickly configure certain aspects of the decoder on the fly. Most macros will perform a sequence of operations internally within the decoder, meaning you would not need to perform each of those operations individually, and can instead use one single command. CV 8 can also be used to save and load User Presets, perform a factory reset, and more!
CV 8 Macros may be programmed on the mainline or a programming track; however, it is strongly recommended that you use a dedicated programming track when performing a factory reset so as to avoid any addressing conflicts.
Available Macros
| Value | Macro/Operation |
|---|---|
| 2 | Factory Reset (Excluding ULST) |
| 3-9 | Not Used |
| 10 | Configure F1 and F2 Ditch Lights |
| 11 | Configure Trolley Preset |
| 12 | Configure "Deluxe" Trolley Preset |
| Value | Macro/Operation |
|---|---|
| 2 | Factory Reset (Excluding ULST) |
| 3-7 | Not Used |
| 8 | Factory Reset (Excluding ULST) |
| 10 | Configure F1 and F2 Ditch Lights |
| 11 | Configure Trolley Preset |
| 12 | Configure "Deluxe" Trolley Preset |
| Value | Macro/Operation |
|---|---|
| 2 | Factory Reset (Excluding ULST) |
| 3-9 | Not Used |
| 10 | Configure F1 and F2 Ditch Lights |
| 11 | Configure Trolley Preset |
| 12 | Configure "Deluxe" Trolley Preset |
| 13 | Set Throttle Mode to "Traditional" |
| 14 | Set Throttle Mode to "Prototype" |
