Difference between revisions of "CV 123"

From Train Control Systems Documentation
Jump to navigation Jump to search
m (1 revision imported)
(Rule 17 DImmer Button (0-6) | fixed from previous content (V5 prime mover selection))
Line 1: Line 1:
 
{{Infobox CV
 
{{Infobox CV
|cv name=Prime Mover Selection
+
|cv name=Rule 17 Dimmer Button (0-6)
 
|cv range=0-255
 
|cv range=0-255
|cv accepted=0-(# of Prime Movers)
+
|cv accepted=0-255
|cv default=0
+
|cv default=32
 
}}
 
}}
  
==NMRA CV 123 - Prime Mover Selection==
+
== NMRA CV 126 - Manual Rule 17 Dimmer Button Remapping (0-6) ==
This CV is used to select which prime mover is active in the decoder. Select a value from the table below and program it into CV149 to select that prime mover. A notch change, power cycle, or turning the PM off and back on will be needed in order for the change to take effect.<br>
+
This CV controls what button manually dims Rule 17 lights. The value entered into this CV directly corresponds bitwise to the button number you would like to use for manual Rule 17 dimming. See the table below:  
Note the prime mover can be selected using [[{{NAMESPACE}}:Audio_Assist™|Audio Assist™]] (Menu 1.3) without the need for CV programming.
 
  
 +
If you would like to use multiple buttons to be able to dim Rule 17 Lights, set each bit for each button you would like to use. Set this CV to 0 if you do not want any button to dim the headlight manually.
 +
 +
See [[{{NAMESPACE}}:Dual_Enabled_Functions|Dual Enabled Functions]] to if you want to make the manual Rule 17 dimmer button active in ''Sound Mode'' and not just in ''Light Mode''
  
 
''' Related '''
 
''' Related '''
 
+
* [[{{NAMESPACE}}:CV_61 | Rule 17 Options]]
*[[Diesel Version 5:CV 120|Horn Selection]]
+
* [[{{NAMESPACE}}:Support_-_Lighting#Setting_up_Rule_17 | Support - Lighting]]
*[[Diesel Version 5:CV 122|Bell Selection]]
+
* [[{{NAMESPACE}}:CV_158 | Manual Rule 17 Dimmer Button Remapping (7-12)]]
  
 
[[Category:Standard CV]]
 
[[Category:Standard CV]]
 +
[[Category:Lights]]

Revision as of 18:43, 3 November 2022

CV 123
Rule 17 Dimmer Button (0-6)
Range of Values0-255
Accepted Values0-255
Default Value32

NMRA CV 126 - Manual Rule 17 Dimmer Button Remapping (0-6)

This CV controls what button manually dims Rule 17 lights. The value entered into this CV directly corresponds bitwise to the button number you would like to use for manual Rule 17 dimming. See the table below:

If you would like to use multiple buttons to be able to dim Rule 17 Lights, set each bit for each button you would like to use. Set this CV to 0 if you do not want any button to dim the headlight manually.

See Dual Enabled Functions to if you want to make the manual Rule 17 dimmer button active in Sound Mode and not just in Light Mode

Related