Difference between revisions of "Diesel Version 5:Ditch Light Preset"

From Train Control Systems Documentation
Jump to navigation Jump to search
en>Johnd
 
m (1 revision imported)
(No difference)

Revision as of 21:46, 10 December 2020

Ditch Light Preset:

Programming CV8 = 10 sets up blinking ditch lights. It puts the ditch lights on light output 1 and light output 2, turns the lights on and off with function 1, and causes them to blink along with blow the horn when function 2 is pressed.

CV's that get configured as part of the preset:

CV 35 = 1 Light output 1 turned on/off with button 1.
CV 36 = 1 Light output 2 turned on/off with button 1.
CV 51 = 42 Light output 1 set to Ditch Light, active while going forward and reverse.
CV 52 = 43 Light output 2 set to Ditch Light, active while going forward and reverse.
CV 124 = 8 Maps Ditch Light Blink to button 2. @TODO confirm this
CV 176 += 8 to make function 2 Dual Enabled