Difference between revisions of "Diesel Version 5:CV 88"

From Train Control Systems Documentation
Jump to navigation Jump to search
en>Tcsdcc
 
m
 
(One intermediate revision by one other user not shown)
Line 12: Line 12:
 
|data3 = DEFAULT VALUE
 
|data3 = DEFAULT VALUE
 
}}
 
}}
 +
[[Category:Standard CV]]

Latest revision as of 21:37, 16 July 2021

NMRA CV 88 - Speed Table Step 22

The speed table is defined to be 28 bytes wide, consisting of 28 values for forward speeds. A digital controller that uses this table shall have at least 64 voltage drive levels and can have as many as 256 so that a smooth power curve can be constructed. Note that voltage drive levels are specified in integer values, in the same way as most other parameters. This means that a drive level of 1/4 maximum voltage corresponds to 0100000, not 0010000, as you would expect if the number specified a fraction with a fixed denominator, i.e. value 32 out of a fixed 128 levels (see Definitions section). See Speed Table for more information on how to setup the Speed Table.


NMRA CV88
Speed Table
Range of ValuesRANGE OF VALUES HERE
Default ValueDEFAULT VALUE