Diesel Version 5:CV 86

From Train Control Systems Documentation
Revision as of 20:53, 19 September 2018 by en>Tcsdcc (→‎NMRA CV 86 (Speed Table))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

NMRA CV 86 - Speed Table Step 20

The speed table is defined to be 28 bytes wide, consisting of 28 values for forward speeds. A digital controller that uses this table shall have at least 64 voltage drive levels and can have as many as 256 so that a smooth power curve can be constructed. Note that voltage drive levels are specified in integer values, in the same way as most other parameters. This means that a drive level of 1/4 maximum voltage corresponds to 0100000, not 0010000, as you would expect if the number specified a fraction with a fixed denominator, i.e. value 32 out of a fixed 128 levels (see Definitions section). See Speed Table for more information on how to setup the Speed Table.


NMRA CV86
Speed Table
Range of ValuesRANGE OF VALUES HERE
Default ValueDEFAULT VALUE