Diesel Version 5:CV 15

From Train Control Systems Documentation
Revision as of 19:36, 10 December 2020 by Tcsdcc (talk | contribs) (1 revision imported)
Jump to navigation Jump to search

NMRA CV 15 - Decoder Lock (Key)

The Decoder Lock is used to change CVs in only one of several decoders with the same short address (CV1) or long address (CV17 and CV18) that are installed in the same locomotive. Assign a number to CV16 in each decoder (i.e. 1 to motor decoder, 2 to sound decoder, 3 or higher to other decoders) before the decoders are installed in the locomotive. To change a value in another CV of one of the installed decoders, first write the number 1 (motor), 2 (sound), or 3 or higher (other) into CV15, then send the new value to the CV to be changed. The decoders will compare CV15 to CV16 and, if the values are equal, the CV to be changed will be changed. If the values in CV15 and CV16 are different, the update will be ignored.

NMRA CV 15
Decoder Lock
0-255RANGE OF VALUES HERE
Default ValueDEFAULT VALUE