Difference between revisions of "Diesel Version 5:CV 14"
| Line 1: | Line 1: | ||
| + | {{Infobox CV | ||
| + | |cv name=DC Mode Function Status F0 & F9-F12 | ||
| + | |cv range=0-255 | ||
| + | |cv accepted=0-255 | ||
| + | |cv default=255 | ||
| + | }} | ||
| + | |||
== NMRA CV 14 - Alternate Mode Function Status F9-F12 == | == NMRA CV 14 - Alternate Mode Function Status F9-F12 == | ||
| − | Indicates the status of each function (F9 through F12, & FL) when the unit is operating in alternate power mode, which cannot control the functions. If a function can be controlled, then the corresponding bit is ignored. | + | Indicates the status of each function (F9 through F12, & FL) when the unit is operating in alternate power (DC) mode, which cannot control the functions. If a function can be controlled, then the corresponding bit is ignored. |
| − | + | ||
| + | |||
| + | If the bit for a function output is "cleared," this indicates the function is disabled on DC power. If the bit for a function output is "set," this indicates the function is enabled on DC power. CV 12 is a bitwise CV, where FL in the forward direction is controlled by bit 0, FL in the reverse direction is controlled by bit 1, bit 2 corresponds to F9, and Bit 5 corresponds to F12. See the chart below: | ||
| + | |||
| + | {| class="wikitable" style="text-align: center;" | ||
| + | |- | ||
| + | ! scope="col"| Feature | ||
| + | ! scope="col"| Value | ||
| + | |- | ||
| + | ! scope="row"| Function 0 Forward | ||
| + | | 1 | ||
| + | |- | ||
| + | |- | ||
| + | ! scope="row"| Function 0 Reverse | ||
| + | | 2 | ||
| + | |- | ||
| + | |- | ||
| + | ! scope="row"| Function 9 | ||
| + | | 4 | ||
| + | |- | ||
| + | |- | ||
| + | ! scope="row"| Function 10 | ||
| + | | 8 | ||
| + | |- | ||
| + | |- | ||
| + | ! scope="row"| Function 11 | ||
| + | | 16 | ||
| + | |- | ||
| + | |- | ||
| + | ! scope="row"| Function 12 | ||
| + | | 32 | ||
| + | |- | ||
| + | |} | ||
| + | |||
| + | The SUM of the desired functions active while operating in DC mode must be programmed into CV 14. A value of 255 enables all light functions on DC power. | ||
| − | [[Category: | + | [[Category:Standard CV]] |
| + | [[Category:Bitwise CV]] | ||
| + | [[Category:DC_Mode]] | ||
Revision as of 22:41, 2 April 2021
| |||||||||
NMRA CV 14 - Alternate Mode Function Status F9-F12
Indicates the status of each function (F9 through F12, & FL) when the unit is operating in alternate power (DC) mode, which cannot control the functions. If a function can be controlled, then the corresponding bit is ignored.
If the bit for a function output is "cleared," this indicates the function is disabled on DC power. If the bit for a function output is "set," this indicates the function is enabled on DC power. CV 12 is a bitwise CV, where FL in the forward direction is controlled by bit 0, FL in the reverse direction is controlled by bit 1, bit 2 corresponds to F9, and Bit 5 corresponds to F12. See the chart below:
| Feature | Value |
|---|---|
| Function 0 Forward | 1 |
| Function 0 Reverse | 2 |
| Function 9 | 4 |
| Function 10 | 8 |
| Function 11 | 16 |
| Function 12 | 32 |
The SUM of the desired functions active while operating in DC mode must be programmed into CV 14. A value of 255 enables all light functions on DC power.
