Booster Adapter

From Train Control Systems Documentation
Revision as of 23:37, 21 October 2022 by TCSDanM (talk | contribs) (Page creation with minimal content)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Booster Adapter
Booster Adapter BA-100 (1) (smaller).png
Device Information
ManufacturerTrain Control Systems
TypeBooster Adapter (BA-100)
SKU1597
Release Date10-24-2022
Retail Price$39.95
PSUDC 15V/36W (Not Incl.)

This product is an expansion panel for an network of DCC Boosters. The BA-100 can also provide power for other LCC devices distributed around your layout using the on-board barrel jack and an external 15V power supply (not included).

Included In Package

  • BA-100 Booster Adapter board x1
  • Option Jumpers x4

Physical Overview

The Booster Adapter has a few notable physical features:

  1. Green 2-pin screw terminal
  2. 2.5mm x 5.5mm barrel jack for Power In
  3. Configuration Jumpers (see details below)
  4. Two RJ-11 4-Pin jacks (for use with NCE Control Bus)
  5. Two RJ-12 4-Pin jacks (for use with NCE Control Bus)
  6. Two "LCC" RJ-45 jacks (1x Front: For T-50; 2x Rear for LCC Bus)

Booster Breakout Board.jpg

Configuration Jumpers

Refer to the table below for information on the configuration jumpers available on the LT Panel:

Jumper Position Description
DCC Polarity Description
LCC Power Description