Diesel Version 5:CV 6

From Train Control Systems Documentation
Revision as of 19:54, 2 April 2021 by Dan Mycio (talk | contribs)
Jump to navigation Jump to search
CV 6
Vmid (Mid Volts)
Range of Values0-255
Accepted Values0-255
Default Value0

NMRA CV 6 - Vmid (Mid Volts)

CV6 is used in conjunction with CV2 and CV5 as part of the 3 Point Speed Curves feature


From S-9.2.2 of the NMRA Standards and Recommended Practices:

"Vmid specifies the voltage drive level at the middle speed step. Vmid is used to generate a performance curve in the decoder that translate speed step values into motor voltage drive levels and is specified as a fraction of available rectified supply voltage. Values of 0 or 128 shall indicate that Vmid is not used in the calculation of the speed table."