CV 95

From Train Control Systems Documentation
Revision as of 21:48, 16 July 2021 by TCSDanM (talk | contribs) (1 revision imported)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

NMRA CV 95 - Reverse Trim

Specifies a scale factor by which a voltage drive level should be multiplied, when the controller is driving the unit in reverse. It is interpreted as n/128. If the Reverse Trim configuration variable contains a value of "0" then reverse trim is not implemented.


NMRA CV95
Speed Table
Range of ValuesRANGE OF VALUES HERE
Default ValueDEFAULT VALUE