Diesel Version 5:CV 13
Lua error: Internal error: The interpreter exited with status 1.
NMRA CV 13 - DC Mode Function Status F1-F8
Indicates the status of each function (F1 through F8) when the unit is operating in alternate power (DC) mode, which cannot control the functions. If a function can be controlled, then the corresponding bit is ignored.
If the bit for a function output is "cleared," this indicates the function is disabled on DC power. If the bit for a function output is "set," this indicates the function is enabled on DC power. CV 12 is a bitwise CV, where Bit 0 corresponds to F1, while Bit 7 corresponds to F8. See the chart below:
| Feature | Value |
|---|---|
| Function 1 | 1 |
| Function 2 | 2 |
| Function 3 | 4 |
| Function 4 | 8 |
| Function 5 | 16 |
| Function 6 | 32 |
| Function 7 | 64 |
| Function 8 | 128 |
The SUM of the desired functions active while operating in DC mode must be programmed into CV 13. A value of 255 enables all light functions on DC power.