WOWElectric Version 2 Indexed CV's
List of WOWElectric Version 2 Indexed CV's
Listed below are the TCS Indexed CV's for VERSION 2 of the ACS-64 decoder:
| Indexed CV Number | Indexed CV Value (CV203,CV204) | Description |
|---|---|---|
| 1 | 0,7 | Active Quill - This CV selects which Quills can play if the Grade X Quill button is pressed. TCS decoders include up to 3 unique quills for each horn type. Bit 7 will randomize which order the quills play in if set; otherwise, they will play in order.
(0) Use Quill 1 (1) Use Quill 2 (2) Use Quill 3 (7) Randomize Quills when played |
| 2 | 0,200 | Random Sound 1 Frequency (Air Compressor) |
| 3 | 0,100 | Random Sound 2 Frequency (Power Converter Blower) |
| 4 | 0,130 | Random Sound 2 Frequency (Traction Motor Blower) |
| 5 | 0,255 | Random Sound 4 Frequency (Default - not used)
NOTE: This channel is used/overwritten when the "Random Whoosh" function is activated |
| 6 | 3,3 | Random Sound Overall Frequency |
| 7 | 0,15 | Random Sound Cutout Speed Step (Default - Speed Step 15) |
| 8 | V1: 0,3
V2: 0,6 |
Horn Selection |
| 9 | 0,1 | Throttle Mode - Not Used |
| 10 | 0,100 | Master Volume |
| 11 | V2=0,1 | Traction Motor Selection
VERSION 2 ONLY - NOT USED IN V1 - Only one Traction Motor sound is available in Version 1 the ACS-64 decoder |
| 12 | 255,2 | Automatic and DC Mode Sounds
(0) CREW ALERT ACTIVE (1)* ENABLE DC MODE GRADE X QUILL (2) NOT USED (3) AUTOMATIC DCC MODE BELL (4) AUTOMATIC DCC MODE FORWARD HORN QUILL (5) AUTOMATIC DCC MODE REVERSE HORN QUILL (6) AUTOMATIC DCC MODE STOP HORN BLAST (7) ENABLE DIRECTION CHANGE SOUND (8)* ENABLE RANDOM SOUND 1 CHANNEL (9)* ENABLE RANDOM SOUND 2 CHANNEL (10)* ENABLE RANDOM SOUND 3 CHANNEL (11)* ENABLE RANDOM SOUND 4 CHANNEL (12)* ENABLE DC MODE AUTOMATIC BELL (13)* ENABLE DC MODE FORWARD SOUND (14)* ENABLE DC MODE REVERSE SOUND (15)* ENABLE DC MODE STOP SOUND CV 203 = 255 + CV 204 = 2 will enable all DC mode automatic sounds only |
| 13 | 0,30 | Brake Grinding Start Speed - Speed step at which the brake squeal sound will switch from train brake sounds to locomotive disc brake squeal sounds |
| 14 | 3,79 | Dual Enabled Functions
(0)* F0F (1)* F0R (2)* F1 (3)* F2 (4) F3 (5) F4 (6)* F5 (7) F6 (8)* F7 (9)* F8 (10) F9 (11) F10 (12) F11 (13) F12 (14) [reserved] (15) [reserved] ACS-64 default is F0F, F0R, F1, F2, F5, F7, and F8 |
| 19 | V1: 18,251
V2: 192,248 |
"USER OPTIONS" Indexed CV - bitwise (inclusive selection):
(0) Not Used (1) Not Used (2) Mute on startup/engine auto start mute if set (3) Enable switching/mainline mode audio feedback (4) Enable Rotate horn/bell audio feedback (5)* Enable light mode/sound mode audio feedback (6) Enable Audio auto shutoff timer (7)* Digitrax bit-set simulates button 2 as toggle while in A.A. mode (8) Not Used (9) Not Used (10) Reverse directional horns (11) Not Used (12) Not Used (13) Not Used (14) Enable Bachmann Function Pagination (Not available in First Run models) (15) Grade Crossing Quill sound blinks ditch lights (Not available in First Run models) ACS-64 First Run default 4859 [00010010 11111011], (Enables all audio feedback options, Momentary F2 in AA, Mainline mode) ACS-64 Second Run default 49400 [11000000 11111000], (Same as above except: ADD Function Pagination and Ditch Light Quill Blink) |
| 20 | 0,0 | Idling Sound Selection
VERSION 2 ONLY - Valid Values are 0 or 1 |
| 21 | 10,40 | Automatic Audio Shutoff Timer - Mutes the decoder after the configured amount of time
Default is approximately 15 minutes |
| 23 | 0,0 | Bell Selection - Only 1 bell available (E-bell) |
| 43 | 5,0 | DC Mode start voltage – Voltage at which the engine will start making noise in DC mode, the higher the value the higher the voltage |
| 44 | 5,70 | Voltage at which the DC mode bell will stop playing, the higher the value the higher the voltage threshold. |
| 45 | 15 | Speed step in DCC mode that the automatic bell will stop playing at |
| 46 | V2: 0,150 | DC Mode motor hysteresis – When the engine starts moving in DC mode the increased current draw may cause some oscillation.
If so, increase the value in this CV until the oscillation goes away. If the engine is going through a power on reset try increasing Sound CV 43 (Voltage at which the Engine will power up at while in DC mode) |
| 48 | 3,232 | Traction Motor Minimum Volume - The minimum volume the traction motor is allowed to be at Speed Step 1 |
| 50 | 6 | “Switching" momentum mode acceleration value |
| 51 | 6 | “Switching" momentum mode deceleration value |
| 52 | 20 | “Mainline" momentum mode acceleration value |
| 53 | 60 | “Mainline" momentum mode deceleration value |
| 54 | 0,80 | Traction Motor Fade-Out Speed Step - Speed step at which the Traction Motor sound will be completely faded into Gearbox sound |
| 55 | 0,15 | Traction Motor Gearbox Starting Speed Step - Speed step at which the Traction Motor Gearbox sound will begin fading into the Traction Motor sound |
| 56 | 0,0 | Traction Motor Gearbox Minimum Volume - The volume at which the Traction Motor Gearbox sound will begin to fade in from
NOTE: It is not recommended to change this CV value; Recommended Maximum is 10 |
| 58 | 0,7 | High Horn Threshold (5mph safety switch)
Speed step at which the decoder will begin playing the High-Pressure Horn. When the speed is set to below this value, the decoder will use the low-pressure horn. A value of 0 disables this feature, and the high horn will always play. A value of 1 will only play the low horn when stationary. (Valid Values = 0-126) VERSION 2+ ONLY NOTE: This feature only applies to specific horns, and does not apply to all horn sets available on this decoder. |
| 59 | 0,2 | Traction Motor Blower Selection - Selects which Traction Motor Blower sound is played while moving
0 = Siemens Traction Motor Blower 1 | 1 = Siemens Traction Motor Blower 2 | 2 = Siemens Traction Motor Blower 3 |
