CV 8 "Macros"
CV 8 offers multiple "macro" options which allow you to quickly configure certain aspects of the decoder on the fly. Most macros will perform a sequence of operations internally within the decoder, meaning you would not need to perform each of those operations individually, and can instead use one single command. CV 8 can also be used to save and load User Presets, perform a factory reset, and more!
CV 8 Macros may be programmed on the mainline or a programming track; however, it is strongly recommended that you use a dedicated programming track when performing a factory reset so as to avoid any addressing conflicts.
Available Macros
TCS Non-Sound Version 88-91
| Value
|
Macro/Operation
|
| 2
|
Factory Reset (Excluding ULST)
|
| 10
|
Configure F1 and F2 Ditch Lights
|
| 11
|
Configure Trolley Preset
|
| 12
|
Configure "Deluxe" Trolley Preset
|
TCS Non-Sound Version 92
| Value
|
Macro/Operation
|
| 2
|
Factory Reset (Excluding ULST)
|
| 8
|
Factory Reset (Excluding ULST)
|
| 10
|
Configure F1 and F2 Ditch Lights
|
| 11
|
Configure Trolley Preset
|
| 12
|
Configure "Deluxe" Trolley Preset
|
WOWSound Version 4
| Value
|
Macro/Operation
|
| 2
|
Factory Reset (Excluding ULST)
|
| 10
|
Configure F1 and F2 Ditch Lights
|
| 11
|
Configure Trolley Preset
|
| 12
|
Configure "Deluxe" Trolley Preset
|
WOWSound Version 5
| Value
|
Macro/Operation
|
| 2
|
Factory Reset
|
| 3
|
Reset Sound Button Mappings
|
| 4
|
Reset all NMRA CV's (1-255)
|
| 5
|
Reset all Indexed CV's
|
| 6
|
Factory Reset 128-point BEMF Table
|
| 8
|
Factory Reset
|
| 10
|
Load User Preset 1
|
| 11
|
Load User Preset 2
|
| 12
|
Load User Preset 3
|
| 15
|
Configure F1 and F2 Ditch Lights
|
| 11+
|
[Reserved]
|