IB-MB3

From Train Control Systems Documentation
Revision as of 02:25, 17 July 2024 by TCSDanM (talk | contribs) (high and low pin pictures added)
Jump to navigation Jump to search
IB-MB3
IB-MB3 Rev1 Product Picture (Top).png
Device Information
ManufacturerTrain Control Systems
TypeMotherboard
SKU1665
Release Date17-July-2024
Retail Price$59.95
Lighting Outputs8
Bulb OutputsUp to 8 (Selective)
LED OutputsUp to 8 (Selective)
Power SupplyDCC or DC 5V-24V
Current Rating<3A (Combined)
Output Rating<100mA (Each)
Keep Alive®On-Board
Dimensions (LxWxH)2.28” x 0.69” x 0.23”
58mm x 17mm x 6mm
IB-MB3-NC
IB-MB3-NC Rev1 Product Picture (Top).png
Device Information
ManufacturerTrain Control Systems
TypeMotherboard
SKU1666
Release Date17-July-2024
Retail Price$59.95
Lighting Outputs8
Bulb OutputsUp to 8 (Selective)
LED OutputsUp to 8 (Selective)
Power SupplyDCC or DC 5V-24V
Current Rating<3A (Combined)
Output Rating<100mA (Each)
Keep Alive®On-Board
Dimensions (LxWxH)2.28” x 0.69” x 0.23”
58mm x 17mm x 6mm

Technical Information

The IB-MB3 from TCS is an 8-function 21-pin decoder motherboard with integrated Keep Alive® on-board. The IB-MB3 was designed as a universal-fit motherboard, and fits particularly well into many locomotives which were factory-equipped with QSI sound decoders. Unlike all previous motherboard designs from TCS, this motherboard does not include on-board Keep Alive® and instead has a 2-pin plug for connecting an external KA-P Keep Alive® or Soundtraxx "Current Keeper."

The IB-MB3 has been designed to meet NMRA standards, and is compatible with any NMRA-compliant 21-pin decoder with up to 8 lighting outputs, such as TCS’ WOW121 or EU821 decoders (sold separately).

This motherboard can be used with LEDs thanks to on-board resistors. See the Lighting Wiring Instructions section below for detailed instructions.

Keep Alive Plug
IB-MB3 IB-MB3-NC
IB-MB3 Rev1 Product Picture (KA) - Square.png IB-MB3-NC Rev1 Product Picture (KA) - Square.png
Click to Enlarge Click to Enlarge

Connector & No-Connector Variants

The standard variant of the IB-MB3 includes a single 6-pin connector, as well as three 2-pin connectors for the wiring of the locomotive. The corresponding wiring kit can be purchased with the IB-MB3 to include all of the necessary wiring harnesses which use color-coded wire. The "-NC" variant of this motherboard does not include the plug connectors or harnesses that may be otherwise included in the standard variant of this motherboard; regardless, the "-NC" variant of the IB-MB3 will always include the plug for Keep Alive.

Pin Height Options

All of TCS' motherboards, including this one, are available for purchase with "high pins" which are compatible with 21-pin decoders from other manufacturers. Since TCS designs decoders with a lower profile, they can be used with a "low profile" pin header. The TCS decoder and motherboard with low profile pins will often fit into installations which would otherwise be impossible due to height clearances.

Pin Headers
Low Profile (TCS Compatible) High Profile (Non-TCS Compatible)
IB-MB3-NC Rev1 Product Picture (Low Pins).png IB-MB3-NC Rev1 Product Picture (High Pins).png
Click to Enlarge Click to Enlarge

Wiring Diagram

Shown below is the latest wiring diagram for the IB-MB3. This diagram depicts the "Revision 1" version of the IB-MB3, which is the current production version.

IB-MB3 Rev1 (2024) Wiring Diagram
Click to Enlarge

The wiring diagram above uses colors for inputs, outputs, and other functions as defined in the NMRA standards for Color Coded Wires.

Lighting Wiring Instructions

Wiring Instructions for LED Lights

Perform these steps below to connect LED lighting to the motherboard:

Step 1: Connect the Anode (+) wire from the headlight(s) to any available “V+” (BLUE) pad.
Step 2: Connect the Cathode (-) wire to the F0F and F0R pads shown in the wiring diagram.
Step 3 (Optional): To add more LED lights, connect one wire to any "V+" (BLUE) pad, then connect the second wire from each bulb to the numbered function pads.

Previous Revision Information

None Available