CV 124
| Ditch Light Blink Button | |
|---|---|
| Range of Values | 0-28 |
| Default Value | 2 |
NMRA CV 124 - Ditch Light Blink Button Remapping
This CV controls which function button makes the ditch lights blink when a light output is setup as a ditch light.
| Bit | Button to Map | Value | Default |
|---|---|---|---|
| 0,1 | Button 0 | 1 | No |
| 2 | Button 1 | 4 | No |
| 3 | Button 2 | 8 | Yes |
| 4 | Button 3 | 16 | No |
| 5 | Button 4 | 32 | No |
| 6 | Button 5 | 64 | No |
| 7 | Button 6 | 128 | No |
To control which button makes the ditch lights blink, simply enter the number of that button into this CV. For example to make the ditch lights blink when button 2 is pressed, program a value of 2.
This CV supports mapping to any and all NMRA functions from 0 to 6. If you would like to have multiple buttons be able to blink the ditch lights, program this CV with the SUM of all of the button numbers you would like to use. For example, if you want the bell (1), and horn (2) to each cause the ditch lights to blink, program a value of 12 (4+8). Note that in order for the ditch lights to STOP blinking, ALL of these functions need to be turned back off.
Related:
- Dual Enabled Functions
- List of Available Lighting Features
- CV8 Macros / Quick Presets
- Ditch Light Quick Presets
