Difference between revisions of "LT-50"
(adding primary content) |
m (added links) |
||
| Line 13: | Line 13: | ||
| image=LT-50_Render(1).png}} | | image=LT-50_Render(1).png}} | ||
| − | <p>The LT-50 "Layout Throttle" is an intelligently-designed wired LCC throttle with a built-in command station. Ergonomically designed to comfortably fit your hand and provide easy access to all of the buttons, the LT-50 is the perfect DCC command station for newcomers, or layout operators and builders looking for a highly-capable, portable command station and throttle. Like the CS-105, the LT-50 is overflowing with features, including RailCom® - but there's so much more it can do!</p> | + | <p>The LT-50 "Layout Throttle" is an intelligently-designed wired LCC throttle with a built-in command station. Ergonomically designed to comfortably fit your hand and provide easy access to all of the buttons, the LT-50 is the perfect DCC command station for newcomers, or layout operators and builders looking for a highly-capable, portable command station and throttle. Like the [[CS-105]], the LT-50 is overflowing with features, including RailCom® - but there's so much more it can do!</p> |
<p>The LT-50 Layout Throttle from TCS is the new standard in utility for model railroads. This system brings a new level of operational convenience, as well as a wide range of new features compared to the competition. Instead of spending time with your head in a manual trying to understand your throttle, the intuitive interface of the LT-50 allows you to focus on the important things - operating and enjoying your trains! We are confident that the LT-50 will quickly become your favorite throttle to use.</p> | <p>The LT-50 Layout Throttle from TCS is the new standard in utility for model railroads. This system brings a new level of operational convenience, as well as a wide range of new features compared to the competition. Instead of spending time with your head in a manual trying to understand your throttle, the intuitive interface of the LT-50 allows you to focus on the important things - operating and enjoying your trains! We are confident that the LT-50 will quickly become your favorite throttle to use.</p> | ||
| Line 21: | Line 21: | ||
<p>Also included in the package is a 15V power supply, a single LT-50 fascia panel and fascia cover plate, screws for mounting the fascia board and plate, detachable track power connector, and a single RJ-45 cable.</p> | <p>Also included in the package is a 15V power supply, a single LT-50 fascia panel and fascia cover plate, screws for mounting the fascia board and plate, detachable track power connector, and a single RJ-45 cable.</p> | ||
| − | == Overview == | + | ==Overview== |
[[File:LT-50 Diagram.png|thumb|LT-50 Overview - Click to Enlarge]] | [[File:LT-50 Diagram.png|thumb|LT-50 Overview - Click to Enlarge]] | ||
<p><strong>Large, Full-text Screen</strong><br />1.42" x 0.92" LCD screen with white backlight. Brightness is entirely adjustable for a variety of operating conditions.</p> | <p><strong>Large, Full-text Screen</strong><br />1.42" x 0.92" LCD screen with white backlight. Brightness is entirely adjustable for a variety of operating conditions.</p> | ||
| Line 27: | Line 27: | ||
<p><strong>Programmable Buttons</strong><br />The encoder button, two buttons on the face of the throttle, as well as two multi-position switches on the side (9 total) can be reassigned to control many functions. Examples include dynamic braking, manual notching, and more! Higher-numbered functions are now a simple button press or switch flick away!</p> | <p><strong>Programmable Buttons</strong><br />The encoder button, two buttons on the face of the throttle, as well as two multi-position switches on the side (9 total) can be reassigned to control many functions. Examples include dynamic braking, manual notching, and more! Higher-numbered functions are now a simple button press or switch flick away!</p> | ||
| − | <p><strong>Multiple Connection Modes</strong><br />The LT-50 can be used as a standalone command station, but if connected into an LCC network, the LT-50 will act as a normal LCC throttle. For operators who prefer a wired throttle, the LT-50 can connected to a CS-105 to offer that wired throttle experience.</p> | + | <p><strong>Multiple Connection Modes</strong><br />The LT-50 can be used as a standalone command station, but if connected into an LCC network, the LT-50 will act as a normal LCC throttle. For operators who prefer a wired throttle, the LT-50 can connected to a [[CS-105]] to offer that wired throttle experience.</p> |
<p><strong>Integrated Consisting System</strong><br />Consisting doesn’t have to be difficult, intimidating, or complicated! The LT-50 features a simple consisting interface where users can make, modify, and break up consists in mere seconds.</p> | <p><strong>Integrated Consisting System</strong><br />Consisting doesn’t have to be difficult, intimidating, or complicated! The LT-50 features a simple consisting interface where users can make, modify, and break up consists in mere seconds.</p> | ||
| Line 39: | Line 39: | ||
<p><strong>Flashlight</strong><br />The LT-50 unit comes equipped with two bright white LED's that can be activated at any time - handy for those dropped screws, lost detail parts, decoupling, and ventures under dark, cavernous benchwork.</p> | <p><strong>Flashlight</strong><br />The LT-50 unit comes equipped with two bright white LED's that can be activated at any time - handy for those dropped screws, lost detail parts, decoupling, and ventures under dark, cavernous benchwork.</p> | ||
| − | == Specifications == | + | ==Specifications== |
| − | === DCC System === | + | ===DCC System=== |
| − | * 1.4A continuous, 2.8A peak current limit with soft start, configurable current limit, and load reporting | + | *1.4A continuous, 2.8A peak current limit with soft start, configurable current limit, and load reporting |
| − | * Integrated RailCom® detector | + | *Integrated RailCom® detector |
| − | * Programming Track over main output with automatic switchover, supporting Direct, Paged, and Register modes | + | *Programming Track over main output with automatic switchover, supporting Direct, Paged, and Register modes |
| − | * DCC accessory control for addresses 1 - 2044 | + | *DCC accessory control for addresses 1 - 2044 |
| − | * Up to 20, 10-step Macros, including LCC accessory control | + | *Up to 20, 10-step Macros, including LCC accessory control |
| − | * Configuration through on-screen menu | + | *Configuration through on-screen menu |
| − | === Throttle Features === | + | ===Throttle Features=== |
| − | * Handheld design based on the lightweight and ergonomic UWT-50 | + | *Handheld design based on the lightweight and ergonomic UWT-50 |
| − | * Nine user-programmable buttons for convenient operations | + | *Nine user-programmable buttons for convenient operations |
| − | * Encoder knob for throttle control and menu navigation | + | *Encoder knob for throttle control and menu navigation |
| − | * Plain English configuration through menu | + | *Plain English configuration through menu |
| − | * On-sceen help function | + | *On-sceen help function |
| − | * Can be used as a throttle on LCC and NCE layouts | + | *Can be used as a throttle on LCC and NCE layouts |
| − | === NMRA Layout Command Control (LCC) Features === | + | ===NMRA Layout Command Control (LCC) Features=== |
| − | * LT-50-specific RJ-45 jack (1x) | + | *LT-50-specific RJ-45 jack (1x) |
| − | * RJ-45 jack for LCC communication through CAN-bus (3x) | + | *RJ-45 jack for LCC communication through CAN-bus (3x) |
| − | * Expandable with additional LCC throttles (sold separately) | + | *Expandable with additional LCC throttles (sold separately) |
| − | * 400ma LCC power injection points (2x) | + | *400ma LCC power injection points (2x) |
| − | * Low-power DCC passthrough (optional with configuration) | + | *Low-power DCC passthrough (optional with configuration) |
| − | * Configuration through CAN-bus interface to PC (sold separately) | + | *Configuration through CAN-bus interface to PC (sold separately) |
| − | * Firmware updates via LCC interface | + | *Firmware updates via LCC interface |
| − | === Maximum Number of Locos === | + | ===Maximum Number of Locos=== |
The nominal current limit of the LT-50 is 1.4A continuous. The LT-50 will shut off automatically once a set thermal cutout is reached, and will automatically resume once it has cooled down. Below, we have included a table for some examples of exaggerated load values which can help you determine approximately how many individual locomotives you can operate simultaneously. Note that you will likely be able to run more than the specified Maximum. Your loads/results will vary. | The nominal current limit of the LT-50 is 1.4A continuous. The LT-50 will shut off automatically once a set thermal cutout is reached, and will automatically resume once it has cooled down. Below, we have included a table for some examples of exaggerated load values which can help you determine approximately how many individual locomotives you can operate simultaneously. Note that you will likely be able to run more than the specified Maximum. Your loads/results will vary. | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 102: | Line 102: | ||
|} | |} | ||
| − | == Related == | + | ==Related== |
| − | * [[LT Panel]] | + | *[[LT Panel]] |
| − | * [[LCC Panel]] | + | *[[LCC Panel]] |
| − | * [[CS-105]] | + | *[[CS-105]] |
| − | * [[UWT-50]]<br /> | + | *[[UWT-50]] |
| + | *[[T-50]]<br /> | ||
Revision as of 23:18, 2 August 2022
| LT-50 | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
.png) | |||||||||||||||
| |||||||||||||||
The LT-50 "Layout Throttle" is an intelligently-designed wired LCC throttle with a built-in command station. Ergonomically designed to comfortably fit your hand and provide easy access to all of the buttons, the LT-50 is the perfect DCC command station for newcomers, or layout operators and builders looking for a highly-capable, portable command station and throttle. Like the CS-105, the LT-50 is overflowing with features, including RailCom® - but there's so much more it can do!
The LT-50 Layout Throttle from TCS is the new standard in utility for model railroads. This system brings a new level of operational convenience, as well as a wide range of new features compared to the competition. Instead of spending time with your head in a manual trying to understand your throttle, the intuitive interface of the LT-50 allows you to focus on the important things - operating and enjoying your trains! We are confident that the LT-50 will quickly become your favorite throttle to use.
The LT-50 features an encoder-style knob for easy menu navigation as well as speed control. Package includes two inter-change-able knob wheels.
Also included in the package is a 15V power supply, a single LT-50 fascia panel and fascia cover plate, screws for mounting the fascia board and plate, detachable track power connector, and a single RJ-45 cable.
Contents
Overview
Large, Full-text Screen
1.42" x 0.92" LCD screen with white backlight. Brightness is entirely adjustable for a variety of operating conditions.
Programmable Buttons
The encoder button, two buttons on the face of the throttle, as well as two multi-position switches on the side (9 total) can be reassigned to control many functions. Examples include dynamic braking, manual notching, and more! Higher-numbered functions are now a simple button press or switch flick away!
Multiple Connection Modes
The LT-50 can be used as a standalone command station, but if connected into an LCC network, the LT-50 will act as a normal LCC throttle. For operators who prefer a wired throttle, the LT-50 can connected to a CS-105 to offer that wired throttle experience.
Integrated Consisting System
Consisting doesn’t have to be difficult, intimidating, or complicated! The LT-50 features a simple consisting interface where users can make, modify, and break up consists in mere seconds.
Yard Mode
Yard Mode is an innovative, TCS exclusive feature designed for switching operations and control. Perfect for spicing up repetitive yard moves!
Full-Text Menus
Menus present all options in full words and phrases. No guess work or manuals needed!
Help Text
Use the [?] button on the keypad in any menu to access help text for that menu item. The throttle will display a simple description of the highlighted option. Help is always one button press away!
Flashlight
The LT-50 unit comes equipped with two bright white LED's that can be activated at any time - handy for those dropped screws, lost detail parts, decoupling, and ventures under dark, cavernous benchwork.
Specifications
DCC System
- 1.4A continuous, 2.8A peak current limit with soft start, configurable current limit, and load reporting
- Integrated RailCom® detector
- Programming Track over main output with automatic switchover, supporting Direct, Paged, and Register modes
- DCC accessory control for addresses 1 - 2044
- Up to 20, 10-step Macros, including LCC accessory control
- Configuration through on-screen menu
Throttle Features
- Handheld design based on the lightweight and ergonomic UWT-50
- Nine user-programmable buttons for convenient operations
- Encoder knob for throttle control and menu navigation
- Plain English configuration through menu
- On-sceen help function
- Can be used as a throttle on LCC and NCE layouts
NMRA Layout Command Control (LCC) Features
- LT-50-specific RJ-45 jack (1x)
- RJ-45 jack for LCC communication through CAN-bus (3x)
- Expandable with additional LCC throttles (sold separately)
- 400ma LCC power injection points (2x)
- Low-power DCC passthrough (optional with configuration)
- Configuration through CAN-bus interface to PC (sold separately)
- Firmware updates via LCC interface
Maximum Number of Locos
The nominal current limit of the LT-50 is 1.4A continuous. The LT-50 will shut off automatically once a set thermal cutout is reached, and will automatically resume once it has cooled down. Below, we have included a table for some examples of exaggerated load values which can help you determine approximately how many individual locomotives you can operate simultaneously. Note that you will likely be able to run more than the specified Maximum. Your loads/results will vary.
| Loco Scale & State | Typical Current Draw | Maximum Loco Count |
|---|---|---|
| (All Scales) Idle/Stationary | 0.05A - 0.10A | 15 - 25 |
| (All Scales) Idle/Stationary With Sound | 0.15A - 0.25A | 5 - 10 |
| (N) Under Heavy Load | 0.15A - 0.35A | 5 - 10 |
| (N) Under Heavy Load w/Sound | 0.30A - 0.50A | 3 - 5 |
| (H0) Under Load | 0.25A - 0.75A | 3 - 6 |
| (H0) Under Load w/Sound | 0.35A - 1.00A | 2 - 4 |
