Difference between revisions of "Diesel Version 5:CV 28"
Jump to navigation
Jump to search
en>Dan Mycio m (fixed defaults) |
m (1 revision imported) |
(No difference)
| |
Revision as of 21:43, 10 December 2020
| Bi-Directional Communication Configuration | |
|---|---|
| Range of Values | 0-255 |
| Default Value | 19 |
NMRA CV 28 - Bi-Directional Communication Configuration (RailCom)
Used to configure decoder’s Bi-Directional Communication characteristics when RailCom is enabled in CV 29.
- Note If the decoder does not support a feature contained in this table, it shall not allow the corresponding bit to be set improperly (i.e. the bit should always contain its default value).
| Feature | Description | Default | Value |
|---|---|---|---|
| Channel 1 | If enabled, Channel 1 will broadcast the address. | ON | 1 |
| Channel 2 | If enabled, Channel 2 will send and receive data and provide acknowledgements. | ON | 2 |
| Programming Address 253 | Serves as a programming lock. If this setting is disabled, programming address 253 will be locked. | ON | 16 |
