Difference between revisions of "Diesel Version 5:CV 193"

From Train Control Systems Documentation
Jump to navigation Jump to search
m (1 revision imported)
Line 1: Line 1:
{{Infobox
+
{{Infobox CV
|title = NMRA CV 193
+
|cv name=Automatic Bell Cutout Speed
|header1 = Not Supported
+
|cv range=0-126
|label2 = Range of Values
+
|cv accepted=1-126
|data2 = 0-255
+
|cv default=16
|label3 = Default Value
 
|data3 = 0
 
 
}}
 
}}
  
== NMRA CV 193 - Not Supported ==
+
== NMRA CV 193 - Automatic Bell Cutout Speed ==
Not Supported
+
Starting in V5 of the WOWDiesel TCS now supports Automatic bells in DC and DCC mode. This feature can be enabled in the [[{{NAMESPACE}}:CV_178|Automatic Sounds CV]], the speed at which the automatic bell stops playing is set by this CV. When the Locomotive starts the automatic bell will sound and continue to play until the locomotive stops again or until the cutout speed is reached.

Revision as of 18:40, 2 April 2021

CV 193
Automatic Bell Cutout Speed
Range of Values0-126
Accepted Values1-126
Default Value16

NMRA CV 193 - Automatic Bell Cutout Speed

Starting in V5 of the WOWDiesel TCS now supports Automatic bells in DC and DCC mode. This feature can be enabled in the Automatic Sounds CV, the speed at which the automatic bell stops playing is set by this CV. When the Locomotive starts the automatic bell will sound and continue to play until the locomotive stops again or until the cutout speed is reached.