Diesel Version 5:CV 5: Difference between revisions
Jump to navigation
Jump to search
m (1 revision imported) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Infobox | {{Infobox CV | ||
|cv name=Vhigh (Top Volts) | |||
| | |cv range=0-255 | ||
| | |cv accepted=0-255 | ||
| | |cv default=0 | ||
| | |||
}} | }} | ||
== NMRA CV 5 - Vhigh (Top Volts) == | == NMRA CV 5 - Vhigh (Top Volts) == | ||
Vhigh is used to specify the motor voltage level at maximum speed. This value is a fraction of available voltage. When the contents of CV#5 equal 255 the full available voltage will be applied. Values of 0 or 1 indicate that Vhigh is not used in the calculation of the speed table. VHigh require no other CV programming to be activated. | Vhigh is used to specify the motor voltage level at maximum speed. This value is a fraction of available voltage. When the contents of CV#5 equal 255 the full available voltage will be applied. Values of 0 or 1 indicate that Vhigh is not used in the calculation of the speed table. VHigh require no other CV programming to be activated. | ||
[[Category:Standard CV]] | |||
[[Category:Motor]] | |||
Revision as of 19:48, 2 April 2021
Lua error: Internal error: The interpreter exited with status 1.
NMRA CV 5 - Vhigh (Top Volts)
Vhigh is used to specify the motor voltage level at maximum speed. This value is a fraction of available voltage. When the contents of CV#5 equal 255 the full available voltage will be applied. Values of 0 or 1 indicate that Vhigh is not used in the calculation of the speed table. VHigh require no other CV programming to be activated.