Difference between revisions of "CS-105"
(added transclude for throttle and device capacity) |
|||
| Line 1: | Line 1: | ||
| − | == Overview == | + | ==Overview== |
[[Category:TCS Products]] | [[Category:TCS Products]] | ||
[[Category:Command System]] | [[Category:Command System]] | ||
| Line 50: | Line 50: | ||
Field-update your software to add new features to your command station from the comfort of your own home. And don't worry, you won't lose your settings or your roster! | Field-update your software to add new features to your command station from the comfort of your own home. And don't worry, you won't lose your settings or your roster! | ||
| − | == Specifications == | + | ==Specifications== |
| − | === DCC System === | + | ===DCC System=== |
| − | * 5 Ampere continuous current rating with soft start, configurable current limit, and load reporting | + | *5 Ampere continuous current rating with soft start, configurable current limit, and load reporting |
| − | * Up to 260 locomotives and consists running simultaneously | + | *Up to 260 locomotives and consists running simultaneously |
| − | * Up to 300 10-step Macros using both DCC and LCC accessories | + | *Up to 300 10-step Macros using both DCC and LCC accessories |
| − | * Integrated RailCom® detector on Mainline and Programming Track | + | *Integrated RailCom® detector on Mainline and Programming Track |
| − | * Global detector for compatible Boosters, supporting “Ops” CV reads | + | *Global detector for compatible Boosters, supporting “Ops” CV reads |
| − | * Dedicated Programming Track output with automatic switchover, supporting Direct, Paged, and Register modes | + | *Dedicated Programming Track output with automatic switchover, supporting Direct, Paged, and Register modes |
| − | === Throttle Support === | + | ===Throttle Support=== |
| − | * Up to 4 LCC WiFi throttles via on-board WiFi Access Point (AP) | + | *Up to 4 LCC WiFi throttles via on-board WiFi Access Point (AP) |
| − | * Up to 10 LCC WiFi throttles via external WiFi Access Point (Router) | + | *Up to 10 LCC WiFi throttles via external WiFi Access Point (Router) |
| − | * Up to 250 LCC throttles, wired or via auxiliary LCC WiFi base stations | + | *Up to 250 LCC throttles, wired or via auxiliary LCC WiFi base stations |
| − | * Up to 62 Cab Bus (NCE wired and wireless, Ramtraxx, and SystemOne) throttles and accessories via AUX RJ-11 jack, including ISE ProtoThrottle™ and WifiTrax WFD-30/31 WiThrottle Protocol Bridge | + | *Up to 62 Cab Bus (NCE wired and wireless, Ramtraxx, and SystemOne) throttles and accessories via AUX RJ-11 jack, including ISE ProtoThrottle™ and WifiTrax WFD-30/31 WiThrottle Protocol Bridge |
| − | * Up to 31 XpressNet™ (Lenz, Roco, ZTC, etc.) throttles and accessories via AUX RJ-11 jack (starting from software version 2.0) | + | *Up to 31 XpressNet™ (Lenz, Roco, ZTC, etc.) throttles and accessories via AUX RJ-11 jack (starting from software version 2.0) |
| − | + | For more information about throttle capacity, please see [[CS-105 Throttle and Device Capacity]]. | |
| − | + | ===NMRA Layout Command Control (LCC) Features=== | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | *Dual RJ-45 jack for LCC communication through CAN-bus | |
| − | + | *400mA output current per LCC port | |
| + | *Built-in WiFi LCC computer interface | ||
| + | *Plain English configuration via TCS throttles or a PC | ||
| + | *Supports various DCC boosters connected via LCC cable | ||
| + | *Global RailCom® transmissions over LCC for supporting Boosters | ||
| + | *Firmware updates via WiFi or LCC interface | ||
Revision as of 18:37, 27 July 2022
Contents
Overview
| CS-105 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
.png) | |||||||||||||
| |||||||||||||
The CS-105 is an intelligently-designed DCC command station with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the CS-105 is the perfect DCC command station for newcomers, or layout builders or renovators looking for a highly-capable command station with the latest and greatest technology available.
The CS-105 Command Station from TCS is the new DCC standard for model railroads. This system brings a new level of operational convenience to DCC, especially when paired with a UWT-100. The CS-105 also features a wide range of new features compared to the competition. "Soft Start" as well as configurable short circuit detection for the mainline track output decreases the likelihood of burning up fouled decoders as well. Instead of spending time with your head in a manual trying to understand your system, you can consult the intuitive configuration interface of the CS-105 through a TCS throttle such as the UWT-100, allowing you to focus on the important things - operating and enjoying your trains! We are confident that the CS-105 will quickly become your favorite command station to use.
Also included in the package with the CS-105, power supply, and AC cord are two LCC terminators, detachable track power connector, and detachable programming track connector.
| This product has two Power Supply options: 12 Volts or 15 Volts
Click on one of the options below to shop: | ||
| 12V Power Supply | 15V Power Supply | |
Power Supply Selection: When selecting a power supply voltage, you choice should depend on two factors: 1) Modeling Scale 2) Maximum loco speed. For smaller scales such as Z, N, TT, etc., the 12V supply is recommended. The 12V supply is also acceptable for larger scales such as HO; however, if you like to run your trains at higher speeds the 15V supply increases the maximum voltage available to the motor, allowing your models to reach higher top speeds. This is particularly beneficial to modelers of bullet trains and other high-speed passenger services. Both power supply options are rated to supply the CS-105 with up to 5 Amperes of continuous current all day long!
Small Package; Big Power
The CS-105 is not only feature-packed, but also highly capable with plenty of horsepower for your railroad. The CS-105 has a user-configurable short circuit protection algorithm and current limit up to 5 Amperes. Unlike many systems on the market, when we say "5A continuous" we mean it! The CS-105 can supply up to 5 Amperes of current to your railroad all day and all night long. The CS-105 can also simultaneously operate up to 260 individual locomotives (consisted or solo) thanks to a highly-intelligent packet handler and "stack" management algorithm.
Auxiliary Boosters
5 Amps not enough? We understand. That's why we offer auxiliary boosters such as the B-106! Expand out your current capacity while maintaining your RailCom® network using the LCC-enabled B-106 auxiliary booster. Already have a large layout with boosters you don't want to upgrade yet? No problem! The CS-105 can be integrated into existing ecosystems such as Lenz, NCE, Digitrax, and more using our Booster Adapter (sold separately).
Multiple Connection Modes
The CS-105 can be used as a standalone access point for WiFi throttles such as the UWT-50, but can also connect to an auxiliary AP (router) to expand the network and maximum number of throttle connections. In addition to WiFi throttles, wired throttles such as the LT-50 and T-50 wired LCC throttles can be connected through the LCC Can Bus. But that's not all! The "Aux Cabs" jack on the CS-105 allows you to connect and use some other manufacturers' throttles (such as NCE, Ramtraxx, SystemOne, and more) with the CS-105. Add-on devices such as the "LCC-LocoNet Gateway" from RR-CirKits can also be used to interface Digitrax throttles and a PC.
Consisting
Consisting doesn’t have to be difficult, intimidating, or complicated! The CS-105 features a simple consisting interface where users can make, modify, and break up consists in mere seconds. The CS-105's consisting system also features new and unique configuration options for consisted engines which will make your consisting experience more realistic than ever without having to spend hours setting it up!
Full-Text Menus
The settings of the CS-105 can be accessed through a TCS throttle or JMRI. Configuration menus and options are listed in full words and phrases. No guess work or manuals needed! Use the [?] button on the TCS throttle keypad in any menu to access help text for that menu item. The throttle will display a simple description of the highlighted option. Help is always one button press away!
Easily Updatable
Field-update your software to add new features to your command station from the comfort of your own home. And don't worry, you won't lose your settings or your roster!
Specifications
DCC System
- 5 Ampere continuous current rating with soft start, configurable current limit, and load reporting
- Up to 260 locomotives and consists running simultaneously
- Up to 300 10-step Macros using both DCC and LCC accessories
- Integrated RailCom® detector on Mainline and Programming Track
- Global detector for compatible Boosters, supporting “Ops” CV reads
- Dedicated Programming Track output with automatic switchover, supporting Direct, Paged, and Register modes
Throttle Support
- Up to 4 LCC WiFi throttles via on-board WiFi Access Point (AP)
- Up to 10 LCC WiFi throttles via external WiFi Access Point (Router)
- Up to 250 LCC throttles, wired or via auxiliary LCC WiFi base stations
- Up to 62 Cab Bus (NCE wired and wireless, Ramtraxx, and SystemOne) throttles and accessories via AUX RJ-11 jack, including ISE ProtoThrottle™ and WifiTrax WFD-30/31 WiThrottle Protocol Bridge
- Up to 31 XpressNet™ (Lenz, Roco, ZTC, etc.) throttles and accessories via AUX RJ-11 jack (starting from software version 2.0)
For more information about throttle capacity, please see CS-105 Throttle and Device Capacity.
NMRA Layout Command Control (LCC) Features
- Dual RJ-45 jack for LCC communication through CAN-bus
- 400mA output current per LCC port
- Built-in WiFi LCC computer interface
- Plain English configuration via TCS throttles or a PC
- Supports various DCC boosters connected via LCC cable
- Global RailCom® transmissions over LCC for supporting Boosters
- Firmware updates via WiFi or LCC interface
