CV 28: Difference between revisions
Jump to navigation
Jump to search
m (1 revision imported) |
m (added noinclude to "related" section which should be standard practice.) |
||
| Line 38: | Line 38: | ||
|} | |} | ||
<noinclude> | |||
[[Category:Standard CV]] | [[Category:Standard CV]] | ||
</noinclude> | |||
Revision as of 00:15, 23 June 2022
Lua error: Internal error: The interpreter exited with status 1.
NMRA CV 28 - Bi-Directional Communication Configuration (RailCom)
Used to configure decoder’s Bi-Directional Communication characteristics when RailCom is enabled in CV 29.
- Note If the decoder does not support a feature contained in this table, it shall not allow the corresponding bit to be set improperly (i.e. the bit should always contain its default value).
| Feature | Description | Default | Value |
|---|---|---|---|
| Channel 1 | If enabled, Channel 1 will broadcast the address. | ON | 1 |
| Channel 2 | If enabled, Channel 2 will send and receive data and provide acknowledgements. | ON | 2 |
| Programming Address 253 | Serves as a programming lock. If this setting is disabled, programming address 253 will be locked. | ON | 16 |