Diesel Version 5:CV 27: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
!Value | !Value | ||
!Default | !Default | ||
!Supported by TCS | |||
|- | |- | ||
! scope="row" |0 | ! scope="row" |0 | ||
| Line 20: | Line 21: | ||
|1 | |1 | ||
|OFF | |OFF | ||
|NO | |||
|- | |- | ||
|- | |- | ||
| Line 26: | Line 28: | ||
|2 | |2 | ||
|OFF | |OFF | ||
|NO | |||
|- | |- | ||
|- | |- | ||
| Line 32: | Line 35: | ||
|4 | |4 | ||
|OFF | |OFF | ||
|NO | |||
|- | |- | ||
|- | |- | ||
| Line 38: | Line 42: | ||
| | | | ||
|N/A | |N/A | ||
| | |||
|- | |- | ||
|- | |- | ||
| Line 44: | Line 49: | ||
|16 | |16 | ||
|OFF | |OFF | ||
|NO | |||
|- | |- | ||
|- | |- | ||
| Line 50: | Line 56: | ||
|32 | |32 | ||
|OFF | |OFF | ||
|NO | |||
|- | |- | ||
|- | |- | ||
| Line 56: | Line 63: | ||
| | | | ||
|N/A | |N/A | ||
| | |||
|- | |- | ||
|- | |- | ||
| Line 62: | Line 70: | ||
| | | | ||
|N/A | |N/A | ||
| | |||
|- | |- | ||
|} | |} | ||
| Line 68: | Line 77: | ||
'''THIS FEATURE IS NOT CURRENTLY SUPPORTED''' | '''THIS FEATURE IS NOT CURRENTLY SUPPORTED''' | ||
[[Category:Standard CV]][[Category:Unsupported CV]] | [[Category:Standard CV]] | ||
[[Category:Unsupported CV]] | |||
Revision as of 18:05, 30 March 2023
Lua error: Internal error: The interpreter exited with status 1.
NMRA CV 27 - Decoder Automatic Stopping Configuration
This CV is used to configure which conditions on the rails will cause the decoder to automatically stop.
| Bit | Option | Value | Default | Supported by TCS |
|---|---|---|---|---|
| 0 | Set to Enable Auto Stop in the presence of an asymmetrical DCC signal which is more positive on the right rail | 1 | OFF | NO |
| 1 | Set to Enable Auto Stop in the presence of an asymmetrical DCC signal which is more positive on the left rail | 2 | OFF | NO |
| 2 | Set to Enable Auto Stop in the presence of an Signal Controlled Influence cutout signal | 4 | OFF | NO |
| 3 | [Reserved/Not Used] | N/A | ||
| 4 | Set to Enable Auto Stop in the presence of reverse polarity DC | 16 | OFF | NO |
| 5 | Set to Enable Auto Stop in the presence forward polarity DC | 32 | OFF | NO |
| 6 | [Reserved/Not Used] | N/A | ||
| 7 | [Reserved/Not Used] | N/A |
Note If the decoder does not support a feature contained in this table, the decoder shall not allow the corresponding bit to be set improperly (i.e. the bit should always contain it’s default value).
THIS FEATURE IS NOT CURRENTLY SUPPORTED