Difference between revisions of "Diesel Version 5:CV 9"
Jump to navigation
Jump to search
m (1 revision imported) |
m |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | {{Infobox | + | {{Infobox CV |
| − | + | |cv name=Total PWM Period | |
| − | | | + | |cv range=0-255 |
| − | + | |cv accepted=N/A | |
| − | | | + | |cv default=0 |
| − | | | ||
| − | | | ||
}} | }} | ||
== NMRA CV 9 - Total PWM Period == | == NMRA CV 9 - Total PWM Period == | ||
| − | |||
| − | |||
The value of CV#9 sets the nominal PWM period at the decoder output and therefore the frequency is proportional to the reciprocal of the value. <br> | The value of CV#9 sets the nominal PWM period at the decoder output and therefore the frequency is proportional to the reciprocal of the value. <br> | ||
The recommend formula for PWM period should be: <br><br> | The recommend formula for PWM period should be: <br><br> | ||
| Line 17: | Line 13: | ||
Where MANTISSA is in bits 0-4 bits of CV#9 (low order) and EXP is bits 5-7 for CV#9. If the value programmed into CV-9 falls outside a decoder's capability, it is suggested (but not required) that the decoder "adjust" the value to the appropriate highest or lowest setting supported by the decoder | Where MANTISSA is in bits 0-4 bits of CV#9 (low order) and EXP is bits 5-7 for CV#9. If the value programmed into CV-9 falls outside a decoder's capability, it is suggested (but not required) that the decoder "adjust" the value to the appropriate highest or lowest setting supported by the decoder | ||
| + | |||
| + | '''THIS FEATURE IS NOT CURRENTLY SUPPORTED''' | ||
| + | |||
| + | [[Category:Standard CV]][[Category:Unsupported CV]] | ||
Latest revision as of 21:07, 16 July 2021
| |||||||||
NMRA CV 9 - Total PWM Period
The value of CV#9 sets the nominal PWM period at the decoder output and therefore the frequency is proportional to the reciprocal of the value.
The recommend formula for PWM period should be:
PWM period (uS) = (131 + MANTISSA x 4)x 2 EXP
Where MANTISSA is in bits 0-4 bits of CV#9 (low order) and EXP is bits 5-7 for CV#9. If the value programmed into CV-9 falls outside a decoder's capability, it is suggested (but not required) that the decoder "adjust" the value to the appropriate highest or lowest setting supported by the decoder
THIS FEATURE IS NOT CURRENTLY SUPPORTED
