Difference between revisions of "Diesel Version 5:CV 123"

From Train Control Systems Documentation
Jump to navigation Jump to search
en>Tcsdcc
 
m
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
{{Infobox
+
{{Infobox CV
−
|title = NMRA CV 123
+
|cv name=Prime Mover Selection
−
|header1 = Rule 17 Dim Button
+
|cv range=0-255
−
|label2 = Range of Values
+
|cv accepted=0-(# of Prime Movers)
−
|data2 = 0-29
+
|cv default=0
−
|label3 = Default Value
 
−
|data3 = 4
 
 
}}
 
}}
  
−
== NMRA CV 123 - Rule 17 Dim Button Remapping ==
+
==NMRA CV 123 - Prime Mover Selection==
−
This CV controls what button dims the headlight when Rule 17 is enabled. For example if you want function button 4 to dim the headlight program this CV with a value of 4.
+
This CV is used to select which prime mover is active in the decoder. Select a value from the table below and program it into CV149 to select that prime mover. A notch change, power cycle, or turning the PM off and back on will be needed in order for the change to take effect.<br>
−
<br>
+
Note the prime mover can be selected using [[{{NAMESPACE}}:Audio_Assist™|Audio Assist™]] (Menu 1.3) without the need for CV programming.
−
Set this CV to 29 if you don't want any button to dim the headlight<br>
+
 
−
See [[{{NAMESPACE}}:Dual_Enabled_Functions|Dual Enabled Functions]] to if you want to make the Dim button active in ''Sound Mode'' and not just in ''Light Mode''
+
 
−
<br>
 
−
<br>
 
 
''' Related '''
 
''' Related '''
−
* [[{{NAMESPACE}}:Changing_Light_Effects|Lighting Effects]]
 
−
* [[{{NAMESPACE}}:CV_61 | Rule 17 Options]]
 
  
−
[[Category:Lights]]
+
*[[Diesel Version 5:CV 120|Horn Selection]]
 +
*[[Diesel Version 5:CV 122|Bell Selection]]
 +
 
 +
[[Category:Standard CV]]

Latest revision as of 19:03, 2 April 2021

CV 123
Prime Mover Selection
Range of Values0-255
Accepted Values0-(# of Prime Movers)
Default Value0

NMRA CV 123 - Prime Mover Selection

This CV is used to select which prime mover is active in the decoder. Select a value from the table below and program it into CV149 to select that prime mover. A notch change, power cycle, or turning the PM off and back on will be needed in order for the change to take effect.
Note the prime mover can be selected using Audio Assist™ (Menu 1.3) without the need for CV programming.


Related

Retrieved from "https://docs.tcsdcc.com/index.php?title=Diesel_Version_5:CV_123&oldid=9896"