E-MB1: Difference between revisions

Latest revision as of 19:37, 20 October 2025

Lua error: Internal error: The interpreter exited with status 1.

Technical Information

The E-MB1 from TCS is designed to replace the original lighting board in the any application where you can fit. Recommended fits include locomotives from InterMountain Railway, Bowser, LifeLike 1000 and 2000, Bachmann, and Broadway Limited. This motherboard will accept a 21-pin decoder and allow up to 12-function outputs.

The E-MB1 has been designed to meet NMRA standards, and is compatible with any NMRA-compliant 21-pin decoder with up to 8 lighting outputs, such as TCS’ WOW121 or EU821 decoders (sold separately). This motherboard can be used with LEDs thanks to on-board resistors. See the Lighting Wiring Instructions section below for detailed instructions.

Wiring Diagram

Shown below is the latest wiring diagram for the E-MB1. This diagram depicts the "Revision 1" version of the E-MB1, which is the current production version.

The wiring diagram above uses colors for inputs, outputs, and other functions as defined in the NMRA standards for Color Coded Wires.

Below is the wiring diagram for the adapter board that comes with the E-MB1

Lighting Wiring Instructions

Wiring Instructions for LED Lights

Perform these steps below to connect LED lighting to the motherboard:

Step 1: Connect the Anode (+) wire from the locomotive to any available “V+” (BLUE) pad.
Step 2: Connect the Cathode (-) wire to the F0F (forward headlight), F0R (reverse headlight), or F1-F10 pads shown in the wiring diagram.

The E-MB1 comes with built in resistors on each function pad for LED lighting

Previous Revision Information

None Available

@@ Line 1: / Line 1: @@
 {{Infobox product
-| name=B-MB9
+| name=E-MB1
 | Manufacturer=Train Control Systems
 | Type=Motherboard
 | SKU=1636
-| rDate=July-25
+| rDate=10/27/2025
 | MSRP=$39.95
 | Functions=4
@@ Line 28: / Line 28: @@
 ==Wiring Diagram==
 Shown below is the latest wiring diagram for the {{PAGENAME}}. This diagram depicts the "Revision 1" version of the {{PAGENAME}}, which is the current production version.
-[[File:B-MB9 Bottom Rev2.png|alt=B-MP9(2025) Wiring Diagram|none|thumb|400x400px|''Click to Enlarge'']]The wiring diagram above uses colors for inputs, outputs, and other functions as defined in the NMRA standards for [[Support - Lighting#Decoder Wiring Color Code|Color Coded Wires]].
+[[File:E-MB1.png|alt=E-MB1(2025) Wiring Diagram|none|thumb|400x400px|''Click to Enlarge'']]The wiring diagram above uses colors for inputs, outputs, and other functions as defined in the NMRA standards for [[Support - Lighting#Decoder Wiring Color Code|Color Coded Wires]].
+Below is the wiring diagram for the adapter board that comes with the E-MB1
+[[File:E-MB1 Adapter Board.png|alt=E-MB1(2025) Wiring Diagram|none|thumb|400x400px|''Click to Enlarge'']]
 ==Lighting Wiring Instructions==
@@ Line 35: / Line 40: @@
 Perform these steps below to connect LED lighting to the motherboard:
-Step 1: Connect the Anode (+) wire from the headlight(s) to any available “V+” (BLUE) pad.<br />
+Step 1: Connect the Anode (+) wire from the locomotive to any available “V+” (BLUE) pad.<br />
-Step 2: Connect the Cathode (-) wire to the F1 and F2 pads shown in the wiring diagram.<br />
+Step 2: Connect the Cathode (-) wire to the F0F (forward headlight), F0R (reverse headlight), or F1-F10 pads shown in the wiring diagram.
-===Wiring Instructions for LED Lights===
-Perform these steps to allow bulb support for the headlight and rear light.
-Step 1: Solder the two bridges located on the bottom of the motherboard.<br />
+''The E-MB1 comes with built in resistors on each function pad for LED lighting''<br />
-Step 2: Wire bulbs to the V+ and FL/RL outputs.<br />
 ==Previous Revision Information==