CV 8 Macros

CV 8 "Macros"

CV 8 offers multiple "macro" options which allow you to quickly configure certain aspects of the decoder on the fly. Most macros will perform a sequence of operations internally within the decoder, meaning you would not need to perform each of those operations individually, and can instead use one single command. CV 8 can also be used to save and load User Presets, perform a factory reset, and more!

CV 8 Macros may be programmed on the mainline or a programming track; however, it is strongly recommended that you use a dedicated programming track when performing a factory reset so as to avoid any addressing conflicts.

Available Macros

TCS Non-Sound Version 88-91

Value	Macro/Operation
2	Factory Reset (Excluding ULST)
10	Configure F1 and F2 Ditch Lights
11	Configure Trolley Preset
12	Configure "Deluxe" Trolley Preset

TCS Non-Sound Version 92

Value	Macro/Operation
2	Factory Reset (Excluding ULST)
8	Factory Reset (Excluding ULST)
10	Configure F1 and F2 Ditch Lights
11	Configure Trolley Preset
12	Configure "Deluxe" Trolley Preset

WOWSound Version 4

Value	Macro/Operation
2	Factory Reset (Excluding ULST)
10	Configure F1 and F2 Ditch Lights
11	Configure Trolley Preset
12	Configure "Deluxe" Trolley Preset

WOWSound Version 5

Value	Macro/Operation
1	Load User Preset 1
2	Factory Reset (Load User Preset 1*)
3	Load User Preset 2
4	Load User Preset 3
5	Configure F1 and F2 Ditch Lights
6	Reset all NMRA CV's (1-255)
7	Reset all Indexed CV's
8	Reset 128-point BEMF Table
9	Reset Sound Button Mappings
10+	Reserved