Difference between revisions of "CV 3"
Jump to navigation
Jump to search
m |
m (spelling error) |
||
| Line 11: | Line 11: | ||
Determines the decoder's acceleration rate. The higher the value, the longer the decoder will take to accelerate to a new speed step. | Determines the decoder's acceleration rate. The higher the value, the longer the decoder will take to accelerate to a new speed step. | ||
| − | The formula for the acceleration rate shall be equal to the contents of CV 3 multiplied by 0.896, then divided by the number of speed steps in use. ( | + | The formula for the acceleration rate shall be equal to the contents of CV 3 multiplied by 0.896, then divided by the number of speed steps in use. (CV3*.896)/(126). For example, if the contents of CV 3 = 2, then the acceleration is 0.064 sec/step for a decoder currently using 28 speed steps. |
If CV 3 equals "0" then there is no programmed momentum during acceleration. Changes in speed will be visibly instantaneous. | If CV 3 equals "0" then there is no programmed momentum during acceleration. Changes in speed will be visibly instantaneous. | ||
| Line 19: | Line 19: | ||
'''Related:''' | '''Related:''' | ||
| − | * [[{{NAMESPACE}}:CV 4|CV 4 - Deceleration Rate]] | + | *[[{{NAMESPACE}}:CV 4|CV 4 - Deceleration Rate]] |
| − | * [[{{NAMESPACE}}:Momentum Function|Momentum Function]] | + | *[[{{NAMESPACE}}:Momentum Function|Momentum Function]] |
[[Category:Standard CV]] | [[Category:Standard CV]] | ||
[[Category:Motor]] | [[Category:Motor]] | ||
Revision as of 16:43, 21 July 2021
| |||||||||
NMRA CV 3 - Acceleration Rate
Determines the decoder's acceleration rate. The higher the value, the longer the decoder will take to accelerate to a new speed step.
The formula for the acceleration rate shall be equal to the contents of CV 3 multiplied by 0.896, then divided by the number of speed steps in use. (CV3*.896)/(126). For example, if the contents of CV 3 = 2, then the acceleration is 0.064 sec/step for a decoder currently using 28 speed steps.
If CV 3 equals "0" then there is no programmed momentum during acceleration. Changes in speed will be visibly instantaneous.
NOTE: If your TCS decoder supports the Momentum Modes Feature, this CV can and will be temporarily overwritten with a value based on your current momentum mode.
Related:
