Difference between revisions of "CV 123"
Jump to navigation
Jump to search
tcs>Dan Mycio m |
m (1 revision imported) |
(No difference)
| |
Revision as of 21:47, 16 July 2021
| |||||||||
NMRA CV 123 - Prime Mover Selection
This CV is used to select which prime mover is active in the decoder. Select a value from the table below and program it into CV149 to select that prime mover. A notch change, power cycle, or turning the PM off and back on will be needed in order for the change to take effect.
Note the prime mover can be selected using Audio Assist™ (Menu 1.3) without the need for CV programming.
Related
