View source for CV 80

== NMRA CV 80 - Speed Table Step 14 ==

The speed table is defined to be 28 bytes wide, consisting of 28 values for forward speeds.  A digital controller that uses this table shall have at least 64 voltage drive levels and can have as many as 256 so that a smooth power curve can be constructed. Note that voltage drive levels are specified in integer values, in the same way as most other parameters. This means that a drive level of 1/4 maximum voltage corresponds to 0100000, not 0010000, as you would expect if the number specified a fraction with a fixed denominator, i.e. value 32 out of a fixed 128 levels (see Definitions section).  See [[{{NAMESPACE}}:Speed_Table|Speed Table]] for more information on how to setup the Speed Table.


{{Infobox
|title = NMRA CV80
|header1 = Speed Table 
|label2 = Range of Values
|data2 = RANGE OF VALUES HERE
|label3 = Default Value
|data3 = DEFAULT VALUE
}}
[[Category:Standard CV]]