View source for CV 8 Macros

CV 8 offers multiple "[https://www.oxfordlearnersdictionaries.com/us/definition/english/macro_1 macro]" options which allow you to quickly configure certain aspects of the decoder on the fly. Most macros will perform a sequence of operations internally within the decoder, meaning you would not need to perform each of those operations individually, and can instead use one single command. CV 8 can also be used to save and load User Presets, perform a factory reset, and more!

CV 8 Macros may be programmed on the mainline or a programming track; however, it is strongly recommended that you use a dedicated programming track when performing a factory reset so as to avoid any addressing conflicts. 

===Available Macros===
{| class="wikitable"
|+TCS Non-Sound Version 88-91
!Value
!Macro/Operation
|-
|2
|Factory Reset (Excluding ULST)
|-
|10
|Configure F1 and F2 Ditch Lights
|-
|11
|Configure Trolley Preset
|-
|12
|Configure "Deluxe" Trolley Preset
|}

{| class="wikitable"
|+TCS Non-Sound Version 92
!Value
!Macro/Operation
|-
|2
|Factory Reset (Excluding ULST)
|-
|8
|Factory Reset (Excluding ULST)
|-
|10
|Configure F1 and F2 Ditch Lights
|-
|11
|Configure Trolley Preset
|-
|12
|Configure "Deluxe" Trolley Preset
|}

{| class="wikitable"
|+WOWSound Version 4
!Value
!Macro/Operation
|-
|2
|Factory Reset (Excluding ULST)
|-
|10
|Configure F1 and F2 Ditch Lights
|-
|11
|Configure Trolley Preset
|-
|12
|Configure "Deluxe" Trolley Preset
|}

{| class="wikitable"
|+WOWSound Version 5
!Value
!Macro/Operation
|-
|1
|Load User Preset 1
|-
|2
|Factory Reset (Load User Preset 1*)
|-
|3
|Load User Preset 2
|-
|4
|Load User Preset 3
|-
|5
|Configure F1 and F2 Ditch Lights
|-
|6
|Reset all [[Diesel Version 5:WOWDiesel Standard CV's|NMRA CV's]] (1-255)
|-
|7
|Reset all [[Diesel Version 5:WOWDiesel Indexed CV's|Indexed CV's]]
|-
|8
|Reset 128-point BEMF Table
|-
|9
|Reset Sound Button Mappings
|-
|10+
|Reserved
|}