UWT-100 Main Menu - Revision history

Dan Mycio: renamed display settings; added contrast setting; added some links

2021-02-05T19:03:04Z

renamed display settings; added contrast setting; added some links

← Older revision		Revision as of 19:03, 5 February 2021
Line 119:		Line 119:
	'''8.1.1 Change Buttons'''		'''8.1.1 Change Buttons'''

	There are eight customizable buttons on the throttle: four directly below the screen, two to the left of the thumbwheel, and two to the right of the thumbwheel. First, select the button you wish to assign a function to from a list, then choose the corresponding function from a function list.		There are [[UWT-100#Programmable Buttons\|eight customizable buttons]] on the throttle: four directly below the screen, two to the left of the thumbwheel, and two to the right of the thumbwheel. First, select the button you wish to assign a function to from a list, then choose the corresponding function from a function list.

	'''8.1.2 Consist Functions (same as 3.4)'''		'''8.1.2 Consist Functions (same as 3.4)'''
Line 133:		Line 133:
	8.1.3.2 Reversal Stopping - Determines whether the loco speed should be set to zero when the direction change button is pressed, or keep running at the previous speed in the opposite direction.		8.1.3.2 Reversal Stopping - Determines whether the loco speed should be set to zero when the direction change button is pressed, or keep running at the previous speed in the opposite direction.

	'''8.1.4 ~~Backlight~~ Settings'''		'''8.1.4 Display Settings'''

	Configures the LCD backlight behavior.		Configures the LCD backlight behavior.
Line 144:		Line 144:

	8.1.4.4 Menu Timeout - Sets how many seconds the backlight should remain active after each keypress while accessing a menu. If set to zero, the backlight will never go idle.		8.1.4.4 Menu Timeout - Sets how many seconds the backlight should remain active after each keypress while accessing a menu. If set to zero, the backlight will never go idle.

			8.1.4.5 Contrast - Adjusts the LCD darkness, improving readability in some cases. Increase value to darken, decrease to lighten.

	'''8.1.5 Power Settings'''		'''8.1.5 Power Settings'''
Line 155:		Line 157:
	8.1.6.1 Current Locomotive (Enabled/Disabled) - Allows emergency stop of currently selected locomotive or consist.		8.1.6.1 Current Locomotive (Enabled/Disabled) - Allows emergency stop of currently selected locomotive or consist.

	8.1.6.2 Stop All Locomotives (Enabled/Disabled) - Allows emergency stop of all locomotives.		8.1.6.2 Stop All Locomotives (Enabled/Disabled) - Allows emergency stop of all locomotives simultaneously.

	8.1.6.3 Power Off Layout (Enabled/Disabled) - Allows powering off of the layout from the UWT-100 ~~unit~~.		8.1.6.3 Power Off Layout (Enabled/Disabled) - Allows powering off (and on) of the layout from the UWT-100.

	8.1.6.4 Clear Timeout - Timeout (in seconds) after which the emergency state can be cleared. Caution: a value of 0 only allows for Current Locomotive emergency stop to be supported.		8.1.6.4 Clear Timeout - Timeout (in seconds) after which the emergency state can be cleared. Caution: a value of 0 only allows for Current Locomotive emergency stop to be supported. Pressing the E-STOP button before this timeout has cleared will escalate the E-STOP condition to the next available stage (if applicable).

	===8.3 Welcome Tutorial===		===8.3 Welcome Tutorial===

Jordan: Moved page from stagingtcsdcc:en:UWT-100 Main Menu (history)

2020-03-04T21:49:42Z

Moved page from stagingtcsdcc:en:UWT-100 Main Menu (history)

← Older revision		Revision as of 21:49, 4 March 2020
Line 184:		Line 184:
	Turns the throttle off.		Turns the throttle off.
	==0 Flashlight==		==0 Flashlight==
	Toggles the build-in LED flashlight mounted at the top of the throttle ON or OFF.~~<noinclude>~~		Toggles the build-in LED flashlight mounted at the top of the throttle ON or OFF.

	~~<small>This page was moved from [[stagingtcsdcc:en:UWT-100 Main Menu]]. Its edit history can be viewed at [[UWT-100 Main Menu/edithistory]]</small></noinclude>~~

Jordan: Moved page from stagingtcsdcc:en:UWT-100 Main Menu (history)

2020-03-04T21:12:54Z

Moved page from stagingtcsdcc:en:UWT-100 Main Menu (history)

New page

[[Category:Universal WiFi Throttle]]

Press the Menu (three horizontal lines) button below the scroll wheel to access the UWT-100 Main Menu. Menu items may be selected by pressing the number button that corresponds to each item in the submenu. Users may memorize button sequences to quickly access useful functions - i.e. toggle Yard Mode (Menu, 2, 3) or activate the flashlight (Menu, 0).

==1 Recall==
Shows all addresses or locomotives that were run from this throttle, with the most recent first.

==2 Operations==
Quick access to many actions necessary for operating, such as releasing the current locomotive address or enabling [[Yard Mode]].

===2.1 Release===

Release control over the current locomotive address, resulting in no locomotive selected on the throttle. Throttle will display an "E" for empty.

===2.2 Dispatch===

Dispatches currently selected locomotive. This is mostly of interest to Digitrax users when letting another throttle acquire a consist that has been created. Similar to 'Release,' this will result in no locomotive selected on the throttle.

===2.3 Yard Mode===

Toggles [[Yard Mode]] ON and OFF.

===2.4 Loco Function List===

Shows all known functions of the current locomotive.

==3 Consisting==
Use this menu to manage your [[In-Throttle Consisting|consists]]. From this menu you can Create, View, Modify, and Delete consists.

===3.1 Add Loco To Consist===

Adds a locomotive to the current consist. If no consist is active, the consist will be created with the currently selected locomotive first.

===3.2 View Current Consist===

Lists the locomotives in the current consist, allowing you to edit or remove the consist members.

===3.3 Clear Current Consist===

Disbands the current consist, separating it into individual locomotives.

===3.4 Consist Functions===

Shows a list of consist functions. Selecting any function allows the user to determine whether to route the function to all members of the consist, or just to the current cab using [[Function Routing]].

==4 CV Programming==

This functionality is only available in LCC mode, and this menu item is automatically hidden from users connected via WT mode. More information on CV programming with the UWT-100 will be available soon.

==5 Reserved==

This menu item is currently reserved for a future function update and is automatically hidden from users at this time.

==6 Network Options==
WiFi network and connection settings. Allows you to add, edit, and delete network profiles.

===6.1 Current Network===

Shows the options for the currently connected network.

'''6.1.1 Name'''

Displays the SSID (network name) of the WiFi access point.

'''6.1.2 Reconnect'''

Selecting this option forces the throttle to disconnect from the current WiFi access point and attempt to re-connect to the same access point.

'''6.1.3 Connect Mode'''

Manually select either LCC or WiThrottle protocol operation.

'''6.1.4 Security'''

Select the type of security applied to the current WiFi access point. Typically WPA/WPA2.

'''6.1.5 Password'''

View and edit the current WiFi password.

'''6.1.6 Advanced Settings'''

Additional settings relating to the current network.

'''6.1.7 Save Profile'''

Saves the current network profile to 'Saved Networks.'

'''6.1.8 Delete Profile'''

Deletes the current network profile from the UWT-100.

===6.2 Saved Networks===

Shows a list of the stored network profiles. Selecting a profile brings up a list of many of the above options, including the editing or deletion of saved profiles.

===6.3 Add Network===

Starts the network connection guide to add a new WiFi connection to this throttle. Users may scan for WiFi, use their router's WPS button, or connect via Access Point Mode.

'''6.3.1 Scan for WiFi'''

Scans for nearby WiFi networks and shows a list. If you do not see your network, make sure it is powered on and scan again.

'''6.3.2 Use WPS Button'''

Use the button labeled WPS on your WiFi router to connect without needing to enter the WiFi password.

'''6.3.3 Access Point Mode'''

Use another device like a smartphone to add a new network to the throttle.

==7 About This Throttle==
This menu displays the status of your throttle including the current WiFi connection name, server IP and port number, throttle ID, battery level, and software version information.
==8 Settings==

===8.1 Throttle Settings===

'''8.1.1 Change Buttons'''

There are eight customizable buttons on the throttle: four directly below the screen, two to the left of the thumbwheel, and two to the right of the thumbwheel. First, select the button you wish to assign a function to from a list, then choose the corresponding function from a function list.

'''8.1.2 Consist Functions (same as 3.4)'''

Shows a list of consist functions. Selecting any function allows the user to determine whether to route the function to all members of the consist, or just to the current cab using [[Function Routing]].

'''8.1.3 Drive Settings'''

Settings related to operation of locomotives, including Fast Increment/Decrement speed and Reversal Stopping.

8.1.3.1 Fast Increment/Decrement setting - Specifies how many speed steps should be added or subtracted for each press of the fast increment/decrement button.

8.1.3.2 Reversal Stopping - Determines whether the loco speed should be set to zero when the direction change button is pressed, or keep running at the previous speed in the opposite direction.

'''8.1.4 Backlight Settings'''

Configures the LCD backlight behavior.

8.1.4.1 Active Brightness - Sets the active brightness of the backlight; 0=OFF, 100=MAX.

8.1.4.2 Idle Brightness - Sets the idle brightness of the backlight; 0=OFF, 100=MAX.

8.1.4.3 Throttle Timeout - Sets how many seconds the backlight should remain active after each keypress while running trains in the Drive Window. If set to zero, the backlight will never go idle.

8.1.4.4 Menu Timeout - Sets how many seconds the backlight should remain active after each keypress while accessing a menu. If set to zero, the backlight will never go idle.

'''8.1.5 Power Settings'''

Configures the Auto-Power Off behavior.

8.1.5.1 Auto Power Off - Sets how many minutes the throttle should remain active while not in use. If set to zero, the throttle will never power off.

'''8.1.6 E-Stop Settings'''

8.1.6.1 Current Locomotive (Enabled/Disabled) - Allows emergency stop of currently selected locomotive or consist.

8.1.6.2 Stop All Locomotives (Enabled/Disabled) - Allows emergency stop of all locomotives.

8.1.6.3 Power Off Layout (Enabled/Disabled) - Allows powering off of the layout from the UWT-100 unit.

8.1.6.4 Clear Timeout - Timeout (in seconds) after which the emergency state can be cleared. Caution: a value of 0 only allows for Current Locomotive emergency stop to be supported.

===8.3 Welcome Tutorial===

Activates the first-time throttle setup procedure.

===8.4 User Info Settings===

Sets the name and description of this throttle for LCC network browsers.

===8.5 Network Settings===

Advanced settings for the WiFi connection, including regulatory region info and user profiles.

===8.6 Regulatory===

FCC/IC Regulatory information about the UWT-100.

===8.8 Factory Reset===

Deletes all network profiles and restores settings to factory default state. Caution: this operation cannot be undone.

==9 Power Off==
Turns the throttle off.
==0 Flashlight==
Toggles the build-in LED flashlight mounted at the top of the throttle ON or OFF.<noinclude>

<small>This page was moved from [[stagingtcsdcc:en:UWT-100 Main Menu]]. Its edit history can be viewed at [[UWT-100 Main Menu/edithistory]]</small></noinclude>