TCSDanM: Created page with "{{Infobox CV |cv name=Packet Time-Out Value |cv range=0-255 |cv accepted=0-255 |cv default=? }} ==NMRA CV 11 - Packet Time-Out Value== This CV sets up the maximum time period..."

2024-07-16T01:17:06Z

Created page with "{{Infobox CV |cv name=Packet Time-Out Value |cv range=0-255 |cv accepted=0-255 |cv default=? }} ==NMRA CV 11 - Packet Time-Out Value== This CV sets up the maximum time period..."

New page

{{Infobox CV
|cv name=Packet Time-Out Value
|cv range=0-255
|cv accepted=0-255
|cv default=?
}}

==NMRA CV 11 - Packet Time-Out Value==
This CV sets up the maximum time period that the decoder will maintain its speed without receiving a valid DCC packet.

From NMRA Standard [https://www.nmra.org/sites/default/files/s-9.2.4_2012_07.pdf S-9.2.4 Section C]:

''"While in digital operations mode if the packet time-out value is exceeded the Multi Function Digital Decoder will bring to a stop all controlled devices. The purpose of this time-out is to insure that each Multi Function Digital Decoder receives a periodic update from the Digital Command Station and thereby help prevent runaway conditions. The user should be able to define the value for this time-out within these restrictions: ''

A value of 0 disables the time-out (i.e., the user has chosen not to have a time-out). A value range of 1 through TIMEOUT_MAX sets the time-out to the chosen value. The minimum value of TIMEOUT_MAX will be 20 seconds. It may be longer at the manufacturer's discretion."''

[[Category:Standard CV]]''

Electric Version 5:CV 11 - Revision history

TCSDanM: Created page with "{{Infobox CV |cv name=Packet Time-Out Value |cv range=0-255 |cv accepted=0-255 |cv default=? }} ==NMRA CV 11 - Packet Time-Out Value== This CV sets up the maximum time period..."