Tcsdcc: 1 revision imported

2020-12-10T19:36:24Z

1 revision imported

← Older revision	Revision as of 19:36, 10 December 2020
(No difference)

71.175.18.53 at 17:02, 20 September 2018

2018-09-20T17:02:49Z

New page

{{Infobox
|title = NMRA CV#116
|header1 = Sound Delay Time
|label2 = Range of Values
|data2 = 0-255
|label3 = Default Value
|data3 = 3
}}

== NMRA CV 116 - Sound Delay Time ==
This CV controls how long the sound will delay after a speed command is received before changing the prime mover notch. This feature allows the sound and motor to better sync. 
 
If you change the throttle from speed step 0 to full speed 10 speed steps at a time this will take a few seconds. Without a delay the decoder will most likely go from idle to notch 1, then from notch 1 to notch 8. With a delay the decoder will go from idle to notch 8 as it waits to see what the final desired speed is then calculates what notch to go to.
 
 
''' Example '''
To set the delay time multiply the desired time (in seconds) by 2 and program that value into CV116. For example if you want to give 2 seconds from when the speed command is sent/directional sound starts playing enter a value of 4 into CV116
 
 
''' Related '''
[[{{NAMESPACE}}:CV_115|Motor Delay time]]

Diesel Version 5:CV 116 - Revision history

Tcsdcc: 1 revision imported

71.175.18.53 at 17:02, 20 September 2018