CV 28 - Revision history

JosephR at 16:03, 26 January 2026

2026-01-26T16:03:44Z

← Older revision		Revision as of 16:03, 26 January 2026
Line 25:		Line 25:
	\|ON		\|ON
	\|1		\|1
	\|YES		\|YES*
	\|-		\|-
	\|1		\|1
Line 79:		Line 79:

	\|}		\|}
	''Note: The table above is based upon the RailCom Specification RCN-217 and RCN-225 as of 01-16-2023 and as such is potentially subject to change. Additionally, the last column in this table "supported by TCS" is only true for current production decoders which support RailCom, and may be untrue for specific decoders and/or decoder versions ([[CV 7]], or [[Diesel Version 5:CV 110\|CV 110]]/[[Diesel Version 5:CV 111\|CV 111]]) designed using an older revision of RCN-217.''		''Note: The table above is based upon the RailCom Specification RCN-217 and RCN-225 as of 01-16-2023 and as such is potentially subject to change. Additionally, the last column in this table "supported by TCS" is only true for current production decoders which support RailCom, and may be untrue for specific decoders and/or decoder versions ([[CV 7]], or [[Diesel Version 5:CV 110\|CV 110]]/[[Diesel Version 5:CV 111\|CV 111]]) designed using an older revision of RCN-217.''

			''* Decoders prior to [[CV 7]] version 97 only support Channel 1 broadcast for [[CV 1]] short address.''
	[[Category:Standard CV]]		[[Category:Standard CV]]
	[[Category:Bitwise CV]]		[[Category:Bitwise CV]]

Dan Mycio at 01:56, 17 January 2023

2023-01-17T01:56:40Z

← Older revision		Revision as of 01:56, 17 January 2023
Line 79:		Line 79:

	\|}		\|}
	''Note: The table above is based upon the RailCom Specification RCN-217 as of 12-12-~~2021~~ and as such is potentially subject to change. Additionally, the last column in this table "supported by TCS" is only true for current production decoders which support RailCom, and may be untrue for specific decoders and/or decoder versions ([[CV 7]], or [[Diesel Version 5:CV 110\|CV 110]]/[[Diesel Version 5:CV 111\|CV 111]]) designed using an older revision of RCN-217.''		''Note: The table above is based upon the RailCom Specification RCN-217 and RCN-225 as of 01-16-2023 and as such is potentially subject to change. Additionally, the last column in this table "supported by TCS" is only true for current production decoders which support RailCom, and may be untrue for specific decoders and/or decoder versions ([[CV 7]], or [[Diesel Version 5:CV 110\|CV 110]]/[[Diesel Version 5:CV 111\|CV 111]]) designed using an older revision of RCN-217.''
	[[Category:Standard CV]]		[[Category:Standard CV]]
	[[Category:Bitwise CV]]		[[Category:Bitwise CV]]

Dan Mycio at 01:55, 17 January 2023

2023-01-17T01:55:32Z

← Older revision		Revision as of 01:55, 17 January 2023
Line 3:		Line 3:
	\|cv range=0-255		\|cv range=0-255
	\|cv accepted=0-255		\|cv accepted=0-255
	\|cv default=3 (Varies)		\|cv default=7 (Varies)
	}}		}}

Line 37:		Line 37:
	!Auto Channel 1		!Auto Channel 1
	\|Automatically Turn off Channel 1		\|Automatically Turn off Channel 1
	\|~~OFF~~		\|ON
	\|4		\|4
	\|		\|YES
	\|-		\|-
	\|3		\|3
Line 50:		Line 50:
	\|-		\|-
	\|4		\|4
	! scope="row" \|Programming Address ~~253~~		! scope="row" \|Programming Address 3L
	\|~~Serves as a programming lock.~~ If this setting is ~~disabled~~, programming ~~address 253~~ will be ~~locked~~.		\|If this setting is enabled, programming Long Address 3 will be allowed.
	\|ON		\|OFF
	\|16		\|16
	\|~~YES~~		\|
	\|-		\|-
	\|5		\|5
Line 72:		Line 72:
	\|7		\|7
	!Automatic Login		!Automatic Login
	\|If enabled, allows automatic login		\|If enabled, allows automatic login (RCN-218 or RailComPlus®)
	\|OFF		\|OFF
	\|128		\|128
	\|		\|''(Under Devel.)''
	\|-		\|-

TCSDanM: now including category tags in transcludes of this page

2022-08-23T22:42:28Z

now including category tags in transcludes of this page

← Older revision		Revision as of 22:42, 23 August 2022
Line 79:		Line 79:

	\|}		\|}
	''Note: The table above is based upon the RailCom Specification RCN-217 as of 12-12-2021 and as such is potentially subject to change. Additionally, the last column in this table "supported by TCS" is only true for current production decoders which support RailCom, and may be untrue for specific decoders and/or decoder versions ([[CV 7]], or [[Diesel Version 5:CV 110\|CV 110]]/[[Diesel Version 5:CV 111\|CV 111]]) designed using an older revision of RCN-217.'' ~~<noinclude>~~		''Note: The table above is based upon the RailCom Specification RCN-217 as of 12-12-2021 and as such is potentially subject to change. Additionally, the last column in this table "supported by TCS" is only true for current production decoders which support RailCom, and may be untrue for specific decoders and/or decoder versions ([[CV 7]], or [[Diesel Version 5:CV 110\|CV 110]]/[[Diesel Version 5:CV 111\|CV 111]]) designed using an older revision of RCN-217.''
	[[Category:Standard CV]]		[[Category:Standard CV]]
	[[Category:Bitwise CV]]		[[Category:Bitwise CV]]
	~~</noinclude>~~

TCSDanM: fixed default value

2022-08-23T22:38:48Z

fixed default value

← Older revision		Revision as of 22:38, 23 August 2022
Line 3:		Line 3:
	\|cv range=0-255		\|cv range=0-255
	\|cv accepted=0-255		\|cv accepted=0-255
	\|cv default=19 (Varies)		\|cv default=3 (Varies)
	}}		}}

Dan Mycio: moved "value" column to match my standard formatting for bitwise CV value reference tables

2022-06-23T00:37:56Z

moved "value" column to match my standard formatting for bitwise CV value reference tables

← Older revision		Revision as of 00:37, 23 June 2022
Line 14:		Line 14:
	\|-		\|-
	!Bit		!Bit
	~~! scope="col" \|Value~~
	! scope="col" \|Feature		! scope="col" \|Feature
	! scope="col" \|Description		! scope="col" \|Description
	! scope="col" \|Default		! scope="col" \|Default
			! scope="col" \|Value
	!Supported by TCS		!Supported by TCS
	\|-		\|-
	\|0		\|0
	\|1
	! scope="row" \|Channel 1		! scope="row" \|Channel 1
	\|If enabled, Channel 1 will broadcast the address.		\|If enabled, Channel 1 will broadcast the address.
	\|ON		\|ON
			\|1
	\|YES		\|YES
	\|-		\|-
	\|1		\|1
	\|2
	! scope="row" \|Channel 2		! scope="row" \|Channel 2
	\|If enabled, Channel 2 will send and receive data and provide acknowledgements.		\|If enabled, Channel 2 will send and receive data and provide acknowledgements.
	\|ON		\|ON
			\|2
	\|YES		\|YES
	\|-		\|-
	\|2		\|2
	\|4
	!Auto Channel 1		!Auto Channel 1
	\|Automatically Turn off Channel 1		\|Automatically Turn off Channel 1
	\|OFF		\|OFF
			\|4
	\|		\|
	\|-		\|-
	\|3		\|3
	\|8
	!(Reserved)		!(Reserved)
	\|''Not Used''		\|''Not Used''
	\|N/A		\|N/A
			\|8
	\|		\|
	\|-		\|-
	\|-		\|-
	\|4		\|4
	~~\|16~~
	! scope="row" \|Programming Address 253		! scope="row" \|Programming Address 253
	\|Serves as a programming lock. If this setting is disabled, programming address 253 will be locked.		\|Serves as a programming lock. If this setting is disabled, programming address 253 will be locked.
	\|ON		\|ON
			\|16
	\|YES		\|YES
	\|-		\|-
	\|5		\|5
	~~\|32~~
	!(Reserved)		!(Reserved)
	\|''Not Used''		\|''Not Used''
	\|N/A		\|N/A
			\|32
	\|		\|
	\|-		\|-
	\|6		\|6
	~~\|64~~
	!Current Limit		!Current Limit
	\|If enabled, the higher current limit for RailCom will be enabled		\|If enabled, the higher current limit for RailCom will be enabled
	\|OFF		\|OFF
			\|64
	\|		\|
	\|-		\|-
	\|7		\|7
	~~\|128~~
	!Automatic Login		!Automatic Login
	\|If enabled, allows automatic login		\|If enabled, allows automatic login
	\|OFF		\|OFF
			\|128
	\|		\|
	\|-		\|-

Dan Mycio: major overhaul to bring the table up to date with RCN-217 documentation available on the railcommunity website.

2022-06-23T00:36:33Z

major overhaul to bring the table up to date with RCN-217 documentation available on the railcommunity website.

← Older revision		Revision as of 00:36, 23 June 2022
Line 6:		Line 6:
	}}		}}

	== NMRA CV 28 - Bi-Directional Communication Configuration (RailCom®) ==		==NMRA CV 28 - Bi-Directional Communication Configuration (RailCom®)==
	This CV is used to configure decoder’s bi-directional communication characteristics when RailCom is enabled in [[{{NAMESPACE}}:CV_29\|CV 29]].~~<br/>~~		This CV is used to configure decoder’s bi-directional communication characteristics when RailCom is enabled in [[{{NAMESPACE}}:CV_29\|CV 29]].
	~~Note:~~ If the decoder does not support a feature contained in this table, it shall not allow the corresponding bit to be set improperly. E.G. if a decoder does not support RailCom, this CV will read 0 and will not accept any values to be programmed to it.
			If the decoder does not support a feature contained in this table, it shall not allow the corresponding bit to be set improperly. E.G. if a decoder does not support RailCom, this CV will read 0 and will not accept any values to be programmed to it. Additionally, the decoder should not allow you to enable a feature within the table below which is not supported.

	{\| class="wikitable" style="text-align: center;"		{\| class="wikitable" style="text-align: center;"
	\|-		\|-
	! scope="col"\| Feature		!Bit
	! scope="col"\| Description		! scope="col" \|Value
	! scope="col"\| Default		! scope="col" \|Feature
	! scope="~~col~~"\| ~~Value~~		! scope="col" \|Description
			! scope="col" \|Default
			!Supported by TCS
			\|-
			\|0
			\|1
			! scope="row" \|Channel 1
			\|If enabled, Channel 1 will broadcast the address.
			\|ON
			\|YES
			\|-
			\|1
			\|2
			! scope="row" \|Channel 2
			\|If enabled, Channel 2 will send and receive data and provide acknowledgements.
			\|ON
			\|YES
			\|-
			\|2
			\|4
			!Auto Channel 1
			\|Automatically Turn off Channel 1
			\|OFF
			\|
			\|-
			\|3
			\|8
			!(Reserved)
			\|''Not Used''
			\|N/A
			\|
			\|-
	\|-		\|-
	! scope="row"\| ~~Channel 1~~		\|4
	\| If ~~enabled~~, ~~Channel 1~~ will ~~broadcast the address~~.		\|16
	\| ON		! scope="row" \|Programming Address 253
	\| 1		\|Serves as a programming lock. If this setting is disabled, programming address 253 will be locked.
			\|ON
			\|YES
	\|-		\|-
	! ~~scope="row"\| Channel 2~~		\|5
	\| ~~If enabled, Channel 2 will send and receive data and provide acknowledgements.~~		\|32
	\| ON		!(Reserved)
	\| 2		\|''Not Used''
			\|N/A
			\|
	\|-		\|-
			\|6
			\|64
			!Current Limit
			\|If enabled, the higher current limit for RailCom will be enabled
			\|OFF
			\|
	\|-		\|-
	! ~~scope="row"\| Programming Address 253~~		\|7
	\| ~~Serves as a programming lock.~~ If ~~this setting is disabled~~, ~~programming address 253 will be locked.~~		\|128
	\| ON		!Automatic Login
	\| 16		\|If enabled, allows automatic login
			\|OFF
			\|
	\|-		\|-

	\|}		\|}
	<noinclude>		''Note: The table above is based upon the RailCom Specification RCN-217 as of 12-12-2021 and as such is potentially subject to change. Additionally, the last column in this table "supported by TCS" is only true for current production decoders which support RailCom, and may be untrue for specific decoders and/or decoder versions ([[CV 7]], or [[Diesel Version 5:CV 110\|CV 110]]/[[Diesel Version 5:CV 111\|CV 111]]) designed using an older revision of RCN-217.'' <noinclude>
	[[Category:Standard CV]][[Category:Bitwise CV]]		[[Category:Standard CV]]
			[[Category:Bitwise CV]]
	</noinclude>		</noinclude>

Dan Mycio at 00:23, 23 June 2022

2022-06-23T00:23:56Z

← Older revision		Revision as of 00:23, 23 June 2022
Line 1:		Line 1:
	{{Infobox		{{Infobox CV
	~~\|title = NMRA~~ CV 28		\|cv name=RailCom Configuration
	\|~~header1~~ = ~~Bi-Directional Communication~~ Configuration		\|cv range=0-255
	\|~~label2~~ = ~~Range of Values~~		\|cv accepted=0-255
	\|~~data2~~ = 0-255		\|cv default=19 (Varies)
	\|~~label3 = Default Value~~
	~~\|data3~~ = 19
	}}		}}

	== NMRA CV 28 - Bi-Directional Communication Configuration (~~RailCom~~) ==		== NMRA CV 28 - Bi-Directional Communication Configuration (RailCom®) ==
	~~Used~~ to configure decoder’s Bi-~~Directional Communication~~ characteristics when RailCom is enabled in [[{{NAMESPACE}}:CV_29\|CV 29]].		This CV is used to configure decoder’s bi-directional communication characteristics when RailCom is enabled in [[{{NAMESPACE}}:CV_29\|CV 29]].<br/>
	~~<br>~~<br/>		Note: If the decoder does not support a feature contained in this table, it shall not allow the corresponding bit to be set improperly. E.G. if a decoder does not support RailCom, this CV will read 0 and will not accept any values to be programmed to it.
	*Note If the decoder does not support a feature contained in this table, it shall not allow the corresponding bit to be set improperly (i.e. ~~the bit should always contain its default value)~~.

	{\| class="wikitable" style="text-align: center;"		{\| class="wikitable" style="text-align: center;"
Line 39:		Line 36:
	\|}		\|}
	<noinclude>		<noinclude>
	[[Category:Standard CV]]		[[Category:Standard CV]][[Category:Bitwise CV]]
	</noinclude>		</noinclude>

Dan Mycio: added noinclude to "related" section which should be standard practice.

2022-06-23T00:15:29Z

added noinclude to "related" section which should be standard practice.

← Older revision		Revision as of 00:15, 23 June 2022
Line 38:		Line 38:

	\|}		\|}
			<noinclude>
	[[Category:Standard CV]]		[[Category:Standard CV]]
			</noinclude>

TCSDanM: 1 revision imported

2021-07-16T21:47:57Z

1 revision imported

← Older revision	Revision as of 21:47, 16 July 2021
(No difference)