CV 182 - Revision history

Dan Mycio: added bit 7 (used in OEM V4 charger decoders)

2024-02-07T02:13:54Z

added bit 7 (used in OEM V4 charger decoders)

← Older revision		Revision as of 02:13, 7 February 2024
Line 47:		Line 47:
	\|-		\|-
	\|-		\|-
	!5+		!5
	! scope="row" \|Not Used		! scope="row" \|Not Used
	\|''Bits 5 ~~through 7~~ of CV182 are reserved for future use.''		\|''Bits 5 and 6 of CV182 are reserved for future use.''
	\|N/A		\|N/A
	\|		\|N/A
			\|-
			!7
			!OEM-ONLY
			\|*Used in Bachmann Siemens "Charger" locomotives to enable the automatic Strobe or High Beam feature on supporting models Default is ON/Enabled for these decoders.
			\|OFF*
			\|128
	\|-		\|-
	\|-		\|-

Dan Mycio: added Bit 4 and fixed unused section

2022-09-09T00:25:42Z

added Bit 4 and fixed unused section

← Older revision		Revision as of 00:25, 9 September 2022
Line 1:		Line 1:
	== NMRA CV 182 - Configuration Data (Part 3) ==		==NMRA CV 182 - Configuration Data (Part 3)==
	CV 182 is used to configure advanced settings for the decoder. See the table below for the list of features and a description.		CV 182 is used to configure advanced settings for the decoder. See the table below for the list of features and a description.
	{\| class="wikitable" style="text-align: center;"		{\| class="wikitable" style="text-align: center;"
Line 38:		Line 38:
	\|8		\|8
	\|-		\|-
			!4
			!Enable [[CV 177]]
			Below SS 32
			\|Setting this bit will enable the Motor Power Stroke Limit to be enforced below Speed Step 32.
			(It is strongly recommended that you do not enable this setting unless you know what you are doing)
			\|OFF
			\|16
	\|-		\|-
	!4+		\|-
			!5+
	! scope="row" \|Not Used		! scope="row" \|Not Used
	\|''Bits 4 through 7 of CV182 are reserved for future use.''		\|''Bits 5 through 7 of CV182 are reserved for future use.''
	\|ON		\|N/A
	\|16		\|
	\|-		\|-
	\|-		\|-
	\|}<br />		\|}<br />

	==== Related: ====		====Related:====

	* [[CV 29\|CV 29 - Configuration Data (Part 1)]]		*[[CV 29\|CV 29 - Configuration Data (Part 1)]]
	* [[CV 61\|CV 61 - Configuration Data (Part 2)]]		*[[CV 61\|CV 61 - Configuration Data (Part 2)]]

TCSDanM: creating CV 182 content

2022-08-25T00:36:34Z

creating CV 182 content

New page

== NMRA CV 182 - Configuration Data (Part 3) ==
CV 182 is used to configure advanced settings for the decoder. See the table below for the list of features and a description.
{| class="wikitable" style="text-align: center;"
|-
!Bit
! scope="col" |Feature
! scope="col" |Description
! scope="col" |Default
! scope="col" |Value
|-
!0
! scope="row" |Alternate Motor Algorithm
|Enable this setting only if your locomotive is fitted with a 3-pole, straight-wound motor, or a "coreless" motor for improved performance.
|OFF
|1
|-
|-
!1
! scope="row" |Keep Alive®
Control
|This setting must be enabled if your decoder is being used with any style of Keep Alive® device in order for the decoder to function properly when on Keep Alive power.
If this setting is disabled, the decoder will use "Stop On DC" or behave as if on DC power.
|ON
|2
|-
|-
!2
! scope="row" |Packet Validation
|If this setting is enabled, the decoder will require at least two, identical, valid packets in order to actually process any user input. This is a safety feature which improves performance and reliability on low-quality DCC systems, but can as a result impact the responsiveness of momentary functions particularly on dirty track. Do not disable this option unless you are having obvious issues with the responsiveness of the horn not resulting from a poor quality DCC command station and/or dirty track and wheels. If disabled, the decoder will process every complete packet with data (including noisy, errant data) as valid.
|ALL WOWSound
|4
|-
|-
!3
! scope="row" |Motor Delay
|If enabled, this feature will cause the decoder to wait for a period of time (approximately 2 seconds) before increasing the speed of the motor (in accordance with the [[CV 3|Acceleration]] value). This is most useful for Diesel locomotives which need to build amperage through an increase of RPM's. This delay allows the decoder to increase the notch if necessary before accelerating.
|OFF
|8
|-
|-
!4+
! scope="row" |Not Used
|''Bits 4 through 7 of CV182 are reserved for future use.''
|ON
|16
|-
|-
|}<br />

==== Related: ====

* [[CV 29|CV 29 - Configuration Data (Part 1)]]
* [[CV 61|CV 61 - Configuration Data (Part 2)]]